All MIBs › CISCO-IGMP-FILTER-MIB › cIgmpFilterEditOperation
cIgmpFilterEditOperation
Module: CISCO-IGMP-FILTER-MIB
OID (symbolic): CISCO-IGMP-FILTER-MIB::cIgmpFilterEditOperation
OID (numeric): 1.3.6.1.4.1.9.9.238.1.3.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The function of this object is to allow user to apply the changes in cIgmpFilterEditor objects to cIgmpFilterTable.
This object always has the value 'none' when read. When written each value causes the appropriate action:
'add' - tries to insert the information contained in cIgmpFilterEditor objects into cIgmpFilterTable. If the entry already exists in the table the 'add' fails.
'delete' - tries to delete corresponding entry from cIgmpFilterTable. If a user completely deletes a profile that has corresponding entries in the cIgmpFilterInterfaceTable, then all the interfaces mapped to corresponding profile will be cleared and set to zero.
'modify' - Mode of operation used to edit an entry in cIgmpFilterTable. If the corresponding entry does not exist, modify operation fails. This mode allows user to extend/truncate a contiguous filtered range, type of Internet addressing and filtering action for a profile.
'none' - no operation is performed.
What is cIgmpFilterEditOperation?
A control object used to commit staged IGMP filter profile edits to the live filter table; writing a value such as 'add', 'delete', or 'modify' triggers the corresponding change (reads back as 'none' when idle).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.238.1.3.8 snmpwalk -v2c -c public <target> CISCO-IGMP-FILTER-MIB::cIgmpFilterEditOperation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.238.1.3.8.1 snmpget -v2c -c public <target> CISCO-IGMP-FILTER-MIB::cIgmpFilterEditOperation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.238.1.3.8.1 i <value>
Start monitoring Cisco switches (IGMP filtering) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IGMP-FILTER-MIB::cIgmpFilterEditOperation OID value, configure state conditions and alerts, and monitor any Cisco switches (IGMP filtering) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.238 | ciscoIGMPFilterMIB | CISCO-IGMP-FILTER-MIB |
| 1.3.6.1.4.1.9.9.238.1 | ciscoIgmpFilterMIBObjects | CISCO-IGMP-FILTER-MIB |
| 1.3.6.1.4.1.9.9.238.1.3 | cIgmpFilterEditor | CISCO-IGMP-FILTER-MIB |
| 1.3.6.1.4.1.9.9.238.1.3.8 | cIgmpFilterEditOperation | CISCO-IGMP-FILTER-MIB |