All MIBs › CISCO-IF-LINK-CONFIG-MIB › cilTargetModuleFramingType
cilTargetModuleFramingType
Module: CISCO-IF-LINK-CONFIG-MIB
OID (symbolic): CISCO-IF-LINK-CONFIG-MIB::cilTargetModuleFramingType
OID (numeric): 1.3.6.1.4.1.9.9.175.1.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: This object identifies the framing type of the target interface. notApplicable(1) can not be set.
dsx1ESF Extended SuperFrame DS1 (T1.107) dsx1D4 AT&T D4 format DS1 (T1.107)
Default value is dsx1ESF(3) if cilTargetModuleInterface is a T1 interface and sonet/sdh byte-synchronous mapping is used on the cilSourceInterface. Otherwise, the default value is notApplicable(1).
What is cilTargetModuleFramingType?
This read-create object configures the framing type (e.g., Extended SuperFrame or AT&T D4 format) used on a target T1/DS1 interface module.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.175 | ciscoIfLinkConfigMIB | CISCO-IF-LINK-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.175.1 | cilConfigMIBObjects | CISCO-IF-LINK-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.175.1.1 | cilConfig | CISCO-IF-LINK-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.175.1.1.1 | cilConfTable | CISCO-IF-LINK-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.175.1.1.1.1 | cilConfEntry | CISCO-IF-LINK-CONFIG-MIB |
| 1.3.6.1.4.1.9.9.175.1.1.1.1.4 | cilTargetModuleFramingType | CISCO-IF-LINK-CONFIG-MIB |