All MIBs › CISCO-IETF-PW-MPLS-MIB › cpwVcMplsInboundIndexNext
cpwVcMplsInboundIndexNext
Module: CISCO-IETF-PW-MPLS-MIB
OID (symbolic): CISCO-IETF-PW-MPLS-MIB::cpwVcMplsInboundIndexNext
OID (numeric): 1.3.6.1.4.1.9.10.107.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object contains an appropriate value to be used for cpwVcMplsInboundIndex when creating entries in the cpwVcMplsInboundTable. The value 0 indicates that no unassigned entries are available. To obtain the cpwVcMplsInboundIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index, however the agent MUST NOT assume such retrieval will be done for each row created.
What is cpwVcMplsInboundIndexNext?
This is the inbound-table counterpart to cpwVcMplsOutboundIndexNext, telling a management station the next available index to use when creating a new entry in the cpwVcMplsInboundTable, with 0 signaling no free indexes remain. It exists to let provisioning systems safely allocate a fresh inbound mapping entry without colliding with another management station doing the same thing concurrently. Just like its outbound sibling, if this unexpectedly returns 0 on a device still expected to accept new pseudowire inbound mappings, the inbound table has run out of assignable slots.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.107.1.4 snmpwalk -v2c -c public <target> CISCO-IETF-PW-MPLS-MIB::cpwVcMplsInboundIndexNext
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.107.1.4.1 snmpget -v2c -c public <target> CISCO-IETF-PW-MPLS-MIB::cpwVcMplsInboundIndexNext.1
Start monitoring Cisco MPLS provider-edge (PE) routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-PW-MPLS-MIB::cpwVcMplsInboundIndexNext OID value, configure state conditions and alerts, and monitor any Cisco MPLS provider-edge (PE) routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.107 | cpwVcMplsMIB | CISCO-IETF-PW-MPLS-MIB |
| 1.3.6.1.4.1.9.10.107.1 | cpwVcMplsObjects | CISCO-IETF-PW-MPLS-MIB |
| 1.3.6.1.4.1.9.10.107.1.4 | cpwVcMplsInboundIndexNext | CISCO-IETF-PW-MPLS-MIB |