All MIBs › CISCO-IETF-PW-MIB › cpwVcOutboundOperStatus
cpwVcOutboundOperStatus
Module: CISCO-IETF-PW-MIB
OID (symbolic): CISCO-IETF-PW-MIB::cpwVcOutboundOperStatus
OID (numeric): 1.3.6.1.4.1.9.10.106.1.2.1.28
Node type: OBJECT-TYPE
Type: CpwOperStatus
Access: read-only
Description: Indicates the actual operational status of this VC in the outbound direction - down: if PW signaling has not yet finished, or indications available at the service level indicate that the VC is not passing packets. - testing: if AdminStatus at the VC level is set to test. - dormant: The VC is not available because of the required resources are occupied VC with higher priority VCs . - notPresent: Some component is missing to accomplish the set up of the VC. - lowerLayerDown: The underlying PSN is not in OperStatus 'up'.
What is cpwVcOutboundOperStatus?
This reports the operational health of packets this router is forwarding out toward the PSN for the pseudowire, mirroring cpwVcInboundOperStatus but for the opposite direction, with the same down/testing/dormant style states. It's the object to check when a customer complains their outbound traffic isn't reaching the far end even though inbound traffic is arriving normally. A technician diagnosing a one-way voice call cutting out in one direction would check this object to confirm whether the local router itself thinks its outbound path for that VC is impaired.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.106.1.2.1.28 snmpwalk -v2c -c public <target> CISCO-IETF-PW-MIB::cpwVcOutboundOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.106.1.2.1.28.1 snmpget -v2c -c public <target> CISCO-IETF-PW-MIB::cpwVcOutboundOperStatus.1
Start monitoring Cisco ASR 9000 series MPLS/pseudowire provider-edge router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-PW-MIB::cpwVcOutboundOperStatus OID value, configure state conditions and alerts, and monitor any Cisco ASR 9000 series MPLS/pseudowire provider-edge router from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.106 | cpwVcMIB | CISCO-IETF-PW-MIB |
| 1.3.6.1.4.1.9.10.106.1 | cpwVcObjects | CISCO-IETF-PW-MIB |
| 1.3.6.1.4.1.9.10.106.1.2 | cpwVcTable | CISCO-IETF-PW-MIB |
| 1.3.6.1.4.1.9.10.106.1.2.1 | cpwVcEntry | CISCO-IETF-PW-MIB |
| 1.3.6.1.4.1.9.10.106.1.2.1.28 | cpwVcOutboundOperStatus | CISCO-IETF-PW-MIB |