All MIBs › CISCO-IETF-IP-FORWARD-MIB › cIpForwardPolicy
cIpForwardPolicy
Module: CISCO-IETF-IP-FORWARD-MIB
OID (symbolic): CISCO-IETF-IP-FORWARD-MIB::cIpForwardPolicy
OID (numeric): 1.3.6.1.4.1.9.10.85.2.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unless the mechanism indicated by ipForwardProto specifies otherwise, the policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 Protocols defining 'policy' otherwise must either define a set of values which are valid for this object or must implement an integer-instanced policy table for which this object's value acts as an index.
What is cIpForwardPolicy?
Indicates the policy or condition set (such as ToS) that determines when this particular multipath route is selected among the next hops available for a destination.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.85.2.1.3 snmpwalk -v2c -c public <target> CISCO-IETF-IP-FORWARD-MIB::cIpForwardPolicy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.85.2.1.3.1 snmpget -v2c -c public <target> CISCO-IETF-IP-FORWARD-MIB::cIpForwardPolicy.1
Start monitoring Cisco router/multilayer switch (IP forwarding table) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-IP-FORWARD-MIB::cIpForwardPolicy OID value, configure state conditions and alerts, and monitor any Cisco router/multilayer switch (IP forwarding table) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.85 | ciscoIetfIpForward | CISCO-IETF-IP-FORWARD-MIB |
| 1.3.6.1.4.1.9.10.85.2 | cIpForwardTable | CISCO-IETF-IP-FORWARD-MIB |
| 1.3.6.1.4.1.9.10.85.2.1 | cIpForwardEntry | CISCO-IETF-IP-FORWARD-MIB |
| 1.3.6.1.4.1.9.10.85.2.1.3 | cIpForwardPolicy | CISCO-IETF-IP-FORWARD-MIB |