All MIBs › CISCO-IETF-IP-FORWARD-MIB › cIpCidrRouteTos

cIpCidrRouteTos

OID (symbolic): CISCO-IETF-IP-FORWARD-MIB::cIpCidrRouteTos

OID (numeric): 1.3.6.1.4.1.9.10.85.4.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The policy specifier is the IP TOS Field.  The encoding
of IP TOS is as specified by the following convention.
Zero indicates the default path if no more specific
policy applies.

+-----+-----+-----+-----+-----+-----+-----+-----+
|                 |                       |     |
|   PRECEDENCE    |    TYPE OF SERVICE    |  0  |
|                 |                       |     |
+-----+-----+-----+-----+-----+-----+-----+-----+

   IP TOS                IP TOS
   Field     Policy      Field     Policy
   Contents    Code      Contents    Code
   0 0 0 0  ==>   0      0 0 0 1  ==>   2
   0 0 1 0  ==>   4      0 0 1 1  ==>   6
   0 1 0 0  ==>   8      0 1 0 1  ==>  10
   0 1 1 0  ==>  12      0 1 1 1  ==>  14
   1 0 0 0  ==>  16      1 0 0 1  ==>  18
   1 0 1 0  ==>  20      1 0 1 1  ==>  22
   1 1 0 0  ==>  24      1 1 0 1  ==>  26
   1 1 1 0  ==>  28      1 1 1 1  ==>  30

What is cIpCidrRouteTos?

Reports the IP Type-of-Service (TOS) policy value associated with this route, used to select among multiple paths to the same destination based on traffic type; zero means the default path with no specific TOS policy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.85.4.1.3
snmpwalk -v2c -c public <target> CISCO-IETF-IP-FORWARD-MIB::cIpCidrRouteTos

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.85.4.1.3.1
snmpget -v2c -c public <target> CISCO-IETF-IP-FORWARD-MIB::cIpCidrRouteTos.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cIpCidrRouteTos.1

Start monitoring Cisco router/multilayer switch (IP forwarding table) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-IP-FORWARD-MIB::cIpCidrRouteTos OID value, configure state conditions and alerts, and monitor any Cisco router/multilayer switch (IP forwarding table) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.9	cisco	CAT2600-MIB
1.3.6.1.4.1.9.10	ciscoExperiment	CISCO-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.9.10.85	ciscoIetfIpForward	CISCO-IETF-IP-FORWARD-MIB
1.3.6.1.4.1.9.10.85.4	cIpCidrRouteTable	CISCO-IETF-IP-FORWARD-MIB
1.3.6.1.4.1.9.10.85.4.1	cIpCidrRouteEntry	CISCO-IETF-IP-FORWARD-MIB
1.3.6.1.4.1.9.10.85.4.1.3	cIpCidrRouteTos	CISCO-IETF-IP-FORWARD-MIB

CISCO-IETF-IP-FORWARD-MIB :: cIpCidrRouteTos

cIpCidrRouteTos

Module

This MIB depends on