CISCO-IETF-DHCP-SERVER-MIB :: cDhcpv4ServerSharedNetFreeAddrLowThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-IETF-DHCP-SERVER-MIBcDhcpv4ServerSharedNetFreeAddrLowThreshold

cDhcpv4ServerSharedNetFreeAddrLowThreshold

Module: CISCO-IETF-DHCP-SERVER-MIB

OID (symbolic): CISCO-IETF-DHCP-SERVER-MIB::cDhcpv4ServerSharedNetFreeAddrLowThreshold

OID (numeric): 1.3.6.1.4.1.9.10.102.1.4.1.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The low threshold for available free addresses in this shared network. If the value for available free addresses in this shared network becomes equal to or less than this value, a cDhcpv4ServerFreeAddressLow event is generated for this shared network. No more cDhcpv4ServerFreeAddressLow events will be generated for this subnet during this execution of the DHCP server until the value for available free addresses has exceeded the value of cDhcpv4ServerSharedNetFreeAddrHighThreshold.

What is cDhcpv4ServerSharedNetFreeAddrLowThreshold?

A configurable low-water-mark threshold for free addresses in a shared network; when available free addresses drop to or below this value, the server generates a low free-address event.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.102.1.4.1.1.2
snmpwalk -v2c -c public <target> CISCO-IETF-DHCP-SERVER-MIB::cDhcpv4ServerSharedNetFreeAddrLowThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.102.1.4.1.1.2.1
snmpget -v2c -c public <target> CISCO-IETF-DHCP-SERVER-MIB::cDhcpv4ServerSharedNetFreeAddrLowThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.102.1.4.1.1.2.1 i <value>

Start monitoring Cisco router/switch (DHCP server role) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-DHCP-SERVER-MIB::cDhcpv4ServerSharedNetFreeAddrLowThreshold OID value, configure state conditions and alerts, and monitor any Cisco router/switch (DHCP server role) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.102ciscoIetfDhcpSrvMIBCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1ciscoIetfDhcpv4SrvMIBObjectsCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1.4cDhcpv4SrvConfigurationCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1.4.1cDhcpv4ServerSharedNetTableCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1.4.1.1cDhcpv4ServerSharedNetEntryCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1.4.1.1.2cDhcpv4ServerSharedNetFreeAddrLowThresholdCISCO-IETF-DHCP-SERVER-MIB