CISCO-IETF-DHCP-SERVER-MIB :: cDhcpv4ServerSharedNetFreeAddrHighThreshold

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-IETF-DHCP-SERVER-MIBcDhcpv4ServerSharedNetFreeAddrHighThreshold

cDhcpv4ServerSharedNetFreeAddrHighThreshold

Module: CISCO-IETF-DHCP-SERVER-MIB

OID (symbolic): CISCO-IETF-DHCP-SERVER-MIB::cDhcpv4ServerSharedNetFreeAddrHighThreshold

OID (numeric): 1.3.6.1.4.1.9.10.102.1.4.1.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The high threshold for available free addresses in this shared network. If a cDhcpv4ServerFreeAddressLow event was generated for this subnet, and the value for available free addresses has exceeded the value of cDhcpv4ServerSubnetFreeAddrHighThreshold, then a cDhcpv4ServerFreeAddressHigh event will be generated. No more cDhcpv4ServerFreeAddressHigh events will be generated for this subnet during this execution of the DHCP server until the value for available free addresses becomes equal to or less than the value of cDhcpv4ServerSubnetFreeAddrLowThreshold.

What is cDhcpv4ServerSharedNetFreeAddrHighThreshold?

A configurable (read-write) high-watermark for the number of free IPv4 addresses in a DHCP shared network; once free addresses rise back above this value after a low-threshold event, the server generates a clear/recovery notification.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.102.1.4.1.1.3
snmpwalk -v2c -c public <target> CISCO-IETF-DHCP-SERVER-MIB::cDhcpv4ServerSharedNetFreeAddrHighThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.102.1.4.1.1.3.1
snmpget -v2c -c public <target> CISCO-IETF-DHCP-SERVER-MIB::cDhcpv4ServerSharedNetFreeAddrHighThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.102.1.4.1.1.3.1 i <value>

Start monitoring Cisco router/switch (DHCP server role) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-DHCP-SERVER-MIB::cDhcpv4ServerSharedNetFreeAddrHighThreshold OID value, configure state conditions and alerts, and monitor any Cisco router/switch (DHCP server role) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.102ciscoIetfDhcpSrvMIBCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1ciscoIetfDhcpv4SrvMIBObjectsCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1.4cDhcpv4SrvConfigurationCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1.4.1cDhcpv4ServerSharedNetTableCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1.4.1.1cDhcpv4ServerSharedNetEntryCISCO-IETF-DHCP-SERVER-MIB
1.3.6.1.4.1.9.10.102.1.4.1.1.3cDhcpv4ServerSharedNetFreeAddrHighThresholdCISCO-IETF-DHCP-SERVER-MIB