CISCO-IDSL-LINE-MIB :: cIdslItucStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-IDSL-LINE-MIBcIdslItucStatus

cIdslItucStatus

Module: CISCO-IDSL-LINE-MIB

OID (symbolic): CISCO-IDSL-LINE-MIB::cIdslItucStatus

OID (numeric): 1.3.6.1.4.1.9.9.154.1.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object specifies the state of the ITU-C transceiver:

- loopDown The IDSL link is down, as a result of a near-end has detected a LOS, a LOF, has not exchanged an ACT bit with the downstream BRITE/NT1, or similar fault/condition.

- dslSync The IDSL link has achieved physical layer activation with the first downstream entity (iether a BRITE or the NT1).

- loopUp The IDSL link has exchanged the ACT bit with the NT1, but LMI signalling is not yet active. This is the normal operating state for PPP operation.

- loopUpLmiActive The IDSL link has exchnaged the ACT bit with the NT1 and the LMI signalling is active. This is the normal operating state for frame relay operation.

What is cIdslItucStatus?

This read-only object reports the current operational state of the ITU-C transceiver, such as whether the IDSL link is down due to loss of signal, loss of frame, or failure to exchange the activation bit with the downstream device.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.154.1.2.1.4
snmpwalk -v2c -c public <target> CISCO-IDSL-LINE-MIB::cIdslItucStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.154.1.2.1.4.1
snmpget -v2c -c public <target> CISCO-IDSL-LINE-MIB::cIdslItucStatus.1

Start monitoring Cisco IDSL line cards / DSL access equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IDSL-LINE-MIB::cIdslItucStatus OID value, configure state conditions and alerts, and monitor any Cisco IDSL line cards / DSL access equipment from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.154ciscoIdslLineMIBCISCO-IDSL-LINE-MIB
1.3.6.1.4.1.9.9.154.1ciscoIdslLineMIBObjectsCISCO-IDSL-LINE-MIB
1.3.6.1.4.1.9.9.154.1.2cIdslItucPhysTableCISCO-IDSL-LINE-MIB
1.3.6.1.4.1.9.9.154.1.2.1cIdslItucPhysEntryCISCO-IDSL-LINE-MIB
1.3.6.1.4.1.9.9.154.1.2.1.4cIdslItucStatusCISCO-IDSL-LINE-MIB