All MIBs › CISCO-ICSUDSU-MIB › ciscoICsuDsuT1LoopStatus
ciscoICsuDsuT1LoopStatus
Module: CISCO-ICSUDSU-MIB
OID (symbolic): CISCO-ICSUDSU-MIB::ciscoICsuDsuT1LoopStatus
OID (numeric): 1.3.6.1.4.1.9.9.44.1.2.2.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Current Loop status of T1 CSU/DSU. Represented as a sum of a bit map. The variable bit positions are: 1 - lossofSignal (LOS); unable to detect the DS1 signal. 2 - lossofFrame (LOF); unable to synchronize on the DS1 signal. 4 - detectedRemoteAlarmIndication (RAI); indicates that the transmitting equipment has lost its incoming signal. RAI is commonly called yellow alarm. 8 - detectedAlarmIndicationSignal (AIS); indicates that there is a transmission interruption located either at the equipment originating the AIS signal or upstream of that equipment. Indicated by an unframed, all-'ones' signal. Also known as blue alarm. 16 - placedInLoopback; Line placed in loopback from remote.
What is ciscoICsuDsuT1LoopStatus?
Reports the current loop status of a T1 CSU/DSU as a bitmap value, where set bits indicate conditions such as loss of signal (unable to detect the DS1 signal) or loss of frame (unable to synchronize on the DS1 signal).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.44.1.2.2.1.1 snmpwalk -v2c -c public <target> CISCO-ICSUDSU-MIB::ciscoICsuDsuT1LoopStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.44.1.2.2.1.1.1 snmpget -v2c -c public <target> CISCO-ICSUDSU-MIB::ciscoICsuDsuT1LoopStatus.1
Start monitoring Cisco routers/access platforms with integrated CSU/DSU WAN interface with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ICSUDSU-MIB::ciscoICsuDsuT1LoopStatus OID value, configure state conditions and alerts, and monitor any Cisco routers/access platforms with integrated CSU/DSU WAN interface from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.44 | ciscoICsuDsuMIB | CISCO-ICSUDSU-MIB |
| 1.3.6.1.4.1.9.9.44.1 | ciscoICsuDsuObjects | CISCO-ICSUDSU-MIB |
| 1.3.6.1.4.1.9.9.44.1.2 | ciscoICsuDsuT1 | CISCO-ICSUDSU-MIB |
| 1.3.6.1.4.1.9.9.44.1.2.2 | ciscoICsuDsuT1StatusTable | CISCO-ICSUDSU-MIB |
| 1.3.6.1.4.1.9.9.44.1.2.2.1 | ciscoICsuDsuT1StatusEntry | CISCO-ICSUDSU-MIB |
| 1.3.6.1.4.1.9.9.44.1.2.2.1.1 | ciscoICsuDsuT1LoopStatus | CISCO-ICSUDSU-MIB |