All MIBs › CISCO-HW-MODULE-CONTROL-MIB › chmcOversubPortGrpOversubStatus
chmcOversubPortGrpOversubStatus
Module: CISCO-HW-MODULE-CONTROL-MIB
OID (symbolic): CISCO-HW-MODULE-CONTROL-MIB::chmcOversubPortGrpOversubStatus
OID (numeric): 1.3.6.1.4.1.9.9.714.1.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies the state of the bandwidth oversubscription feature on this port group.
other - none of the following. This value is a read-only value and can not be set on any instance of this object.
enabled - this port group is enabled to operate in bandwidth oversubscription mode.
disabled - this port group is disabled to operate in bandwidth oversubscription mode. The first port indicated by the first four bytes of the value of chmcOversubPortGrpIfIndexList of this port group will keep its administrative status and the remaining ports of this port group will be administratively shut down.
This object will only be configurable when the instance value of chmcOversubModuleCapabilities for the corresponding module has the 'oversubConfigPortGroupLevel' bit set to 1.
What is chmcOversubPortGrpOversubStatus?
Reports/sets whether bandwidth oversubscription is enabled for a specific port group on the module.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.714.1.1.2.1.3 snmpwalk -v2c -c public <target> CISCO-HW-MODULE-CONTROL-MIB::chmcOversubPortGrpOversubStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.714.1.1.2.1.3.1 snmpget -v2c -c public <target> CISCO-HW-MODULE-CONTROL-MIB::chmcOversubPortGrpOversubStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.714.1.1.2.1.3.1 i <value>
Start monitoring Cisco modular chassis routers and switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-HW-MODULE-CONTROL-MIB::chmcOversubPortGrpOversubStatus OID value, configure state conditions and alerts, and monitor any Cisco modular chassis routers and switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.714 | ciscoHwModuleControlMIB | CISCO-HW-MODULE-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.714.1 | ciscoHwModuleControlMIBObjects | CISCO-HW-MODULE-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.714.1.1 | chmcOversubscription | CISCO-HW-MODULE-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.714.1.1.2 | chmcOversubPortGroupTable | CISCO-HW-MODULE-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.714.1.1.2.1 | chmcOversubPortGroupEntry | CISCO-HW-MODULE-CONTROL-MIB |
| 1.3.6.1.4.1.9.9.714.1.1.2.1.3 | chmcOversubPortGrpOversubStatus | CISCO-HW-MODULE-CONTROL-MIB |