CISCO-GPRS-ACC-PT-MIB :: cgprsAccPtIpv6SecurityVerifyDst

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-GPRS-ACC-PT-MIBcgprsAccPtIpv6SecurityVerifyDst

cgprsAccPtIpv6SecurityVerifyDst

Module: CISCO-GPRS-ACC-PT-MIB

OID (symbolic): CISCO-GPRS-ACC-PT-MIB::cgprsAccPtIpv6SecurityVerifyDst

OID (numeric): 1.3.6.1.4.1.9.9.183.1.1.9.1.1.15

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-create

Description: When this object is set to 'true', the Gateway will check the upstream TPDU destination address against the range of IP addresses reserved for PLMN devices. If there is a match, the TPDU is dropped. This check would enable the Gateway to protect the GPRS network from some hacker who may try to flood the Gateway and PLMN nodes with intense data traffic.

When the object is set to 'false', the Gateway will not perform any checking on the upstream TPDU for the destination address.

What is cgprsAccPtIpv6SecurityVerifyDst?

When enabled, this read-create object causes the gateway to check upstream packets' destination address against the range reserved for PLMN devices, dropping matching packets to protect the GPRS network from misuse.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.183ciscoGprsAccPtMIBCISCO-GPRS-ACC-PT-MIB
1.3.6.1.4.1.9.9.183.1ciscoGprsAccPtMIBObjectsCISCO-GPRS-ACC-PT-MIB
1.3.6.1.4.1.9.9.183.1.1ciscoGprsAccPtConfigCISCO-GPRS-ACC-PT-MIB
1.3.6.1.4.1.9.9.183.1.1.9cgprsAccPtIpv6ConfigsCISCO-GPRS-ACC-PT-MIB
1.3.6.1.4.1.9.9.183.1.1.9.1cgprsAccPtIpv6TableCISCO-GPRS-ACC-PT-MIB
1.3.6.1.4.1.9.9.183.1.1.9.1.1cgprsAccPtIpv6EntryCISCO-GPRS-ACC-PT-MIB
1.3.6.1.4.1.9.9.183.1.1.9.1.1.15cgprsAccPtIpv6SecurityVerifyDstCISCO-GPRS-ACC-PT-MIB