CISCO-FASTHUB-MIB :: mrNetMgmtSetClientStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-FASTHUB-MIBmrNetMgmtSetClientStatus

mrNetMgmtSetClientStatus

Module: CISCO-FASTHUB-MIB

OID (symbolic): CISCO-FASTHUB-MIB::mrNetMgmtSetClientStatus

OID (numeric): 1.3.6.1.4.1.9.2.11.1.4.17.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: other(1) -- none of the following invalid(2) -- an invalid entry permanent(3) -- a valid entry that is in use

Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry. That is, it effectively disassociates the name/IP address identified with said entry from the table. It is an implementation- specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use.

Default value: permanent(3).

What is mrNetMgmtSetClientStatus?

A read-write row status object controlling a Set Client table entry's validity; setting it to invalid(2) removes/invalidates that client entry, while permanent(3) marks it as an active, in-use entry.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.2.11.1.4.17.1.3
snmpwalk -v2c -c public <target> CISCO-FASTHUB-MIB::mrNetMgmtSetClientStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.2.11.1.4.17.1.3.1
snmpget -v2c -c public <target> CISCO-FASTHUB-MIB::mrNetMgmtSetClientStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.2.11.1.4.17.1.3.1 i <value>

Start monitoring Cisco Catalyst FastHub Ethernet hubs with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FASTHUB-MIB::mrNetMgmtSetClientStatus OID value, configure state conditions and alerts, and monitor any Cisco Catalyst FastHub Ethernet hubs from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.2localCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.2.11ciscoFastHubMIBCISCO-FASTHUB-MIB
1.3.6.1.4.1.9.2.11.1ciscoFastHubMIBObjectsCISCO-FASTHUB-MIB
1.3.6.1.4.1.9.2.11.1.4mrNetMgmtCISCO-FASTHUB-MIB
1.3.6.1.4.1.9.2.11.1.4.17mrNetMgmtSetClientTableCISCO-FASTHUB-MIB
1.3.6.1.4.1.9.2.11.1.4.17.1mrNetMgmtSetClientEntryCISCO-FASTHUB-MIB
1.3.6.1.4.1.9.2.11.1.4.17.1.3mrNetMgmtSetClientStatusCISCO-FASTHUB-MIB