All MIBs › CISCO-EVC-MIB › cevcEvcUniOperStatus
cevcEvcUniOperStatus
Module: CISCO-EVC-MIB
OID (symbolic): CISCO-EVC-MIB::cevcEvcUniOperStatus
OID (numeric): 1.3.6.1.4.1.9.9.613.1.3.3.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the operational status derived from data gathered by the OAM protocol for an UNI.
'unknown' Status is not known; possible reason could be caused by the OAM protocol has not provided information regarding the UNI.
'notReachable' UNI is not reachable; possible reason could be caused by the OAM protocol messages having not been received for an excessive length of time.
'up' UNI is active, up, and able to pass traffic.
'down' UNI is down and not passing traffic.
'adminDown' UNI has been administratively put in down state.
'localExcessiveError' UNI has experienced excessive number of invalid frames on the local end of the physical link between UNI-C and UNI-N.
'remoteExcessiveError' UNI has experienced excessive number of invalid frames on the remote side of the physical connection between UNI-C and UNI-N.
'localInLoopback' UNI is loopback on the local end of the physical link between UNI-C and UNI-N.
'remoteInLoopback' UNI is looped back on the remote end of the link between UNI-C and UNI-N.
'localOutLoopback' UNI just transitioned out of loopback on the local end of the physcial link between UNI-C and UNI-N.
'remoteOutLoopback' UNI just transitioned out of loopback on the remote end of the physcial link between UNI-C and UNI-N.
What is cevcEvcUniOperStatus?
This read-only object reports the operational status of a specific UNI within an EVC as learned from the OAM protocol, such as unknown when no status information has been provided yet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.613.1.3.3.1.3 snmpwalk -v2c -c public <target> CISCO-EVC-MIB::cevcEvcUniOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.613.1.3.3.1.3.1 snmpget -v2c -c public <target> CISCO-EVC-MIB::cevcEvcUniOperStatus.1
Start monitoring Cisco Metro/Carrier Ethernet switch or router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-EVC-MIB::cevcEvcUniOperStatus OID value, configure state conditions and alerts, and monitor any Cisco Metro/Carrier Ethernet switch or router from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.613 | ciscoEvcMIB | CISCO-EVC-MIB |
| 1.3.6.1.4.1.9.9.613.1 | ciscoEvcMIBObjects | CISCO-EVC-MIB |
| 1.3.6.1.4.1.9.9.613.1.3 | cevcEvc | CISCO-EVC-MIB |
| 1.3.6.1.4.1.9.9.613.1.3.3 | cevcEvcUniTable | CISCO-EVC-MIB |
| 1.3.6.1.4.1.9.9.613.1.3.3.1 | cevcEvcUniEntry | CISCO-EVC-MIB |
| 1.3.6.1.4.1.9.9.613.1.3.3.1.3 | cevcEvcUniOperStatus | CISCO-EVC-MIB |