CISCO-ES-STACK-MIB :: ciscoEsVLANStpForwardDelay

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ES-STACK-MIBciscoEsVLANStpForwardDelay

ciscoEsVLANStpForwardDelay

Module: CISCO-ES-STACK-MIB

OID (symbolic): CISCO-ES-STACK-MIB::ciscoEsVLANStpForwardDelay

OID (numeric): 1.3.6.1.4.1.9.5.14.8.3.1.11

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this vlan is currently using, in contrast to ciscoEsVLANStpBridgeForwardDelay which is the value that this vlan and all others would start using if/when this vlan were to become the root.]

What is ciscoEsVLANStpForwardDelay?

Reports the time, in hundredths of a second, a port spends in the Listening and Learning states before moving to Forwarding under Spanning Tree Protocol.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.14.8.3.1.11
snmpwalk -v2c -c public <target> CISCO-ES-STACK-MIB::ciscoEsVLANStpForwardDelay

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.14.8.3.1.11.1
snmpget -v2c -c public <target> CISCO-ES-STACK-MIB::ciscoEsVLANStpForwardDelay.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ciscoEsVLANStpForwardDelay.1

Start monitoring Cisco Catalyst chassis with EtherSwitch stacking modules (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ES-STACK-MIB::ciscoEsVLANStpForwardDelay OID value, configure state conditions and alerts, and monitor any Cisco Catalyst chassis with EtherSwitch stacking modules (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.5workgroupCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.14esStackCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.14.8ciscoEsVLANsCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.14.8.3ciscoEsVLANStpTableCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.14.8.3.1ciscoEsVLANStpEntryCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.14.8.3.1.11ciscoEsVLANStpForwardDelayCISCO-ES-STACK-MIB