CISCO-ES-STACK-MIB :: ciscoEsTransitedConfiguredVLANs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ES-STACK-MIBciscoEsTransitedConfiguredVLANs

ciscoEsTransitedConfiguredVLANs

Module: CISCO-ES-STACK-MIB

OID (symbolic): CISCO-ES-STACK-MIB::ciscoEsTransitedConfiguredVLANs

OID (numeric): 1.3.6.1.4.1.9.5.14.8.6

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: A string of octets containing one bit per VLAN in the management domain. The first octet corresponds to VLANs with VlanIndex 1 through 8; the second octet to VLANs 9 through 16; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet. If the bit correspond to a VLAN is set to '1', then the VLAN is a configured transited VLAN on the local device. (Default VLANs which must transit the local device are always considered to be 'configured transited VLANs'.) Any attempt to set a bit string which has: more bits set than the local device can transit; or does not have all bits set corresponding to default VLANs which must transit the device; or set any bits corresponding to non-existant VLANs (VLANs whose IDs are not defined in the management domain) will be completely rejected as an illegal value.

What is ciscoEsTransitedConfiguredVLANs?

A configurable bitmap, one bit per VLAN in the management domain, indicating which VLANs are configured to be transited.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.5.14.8.6
snmpwalk -v2c -c public <target> CISCO-ES-STACK-MIB::ciscoEsTransitedConfiguredVLANs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.5.14.8.6.1
snmpget -v2c -c public <target> CISCO-ES-STACK-MIB::ciscoEsTransitedConfiguredVLANs.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.5.14.8.6.1 s <value>

Start monitoring Cisco Catalyst chassis with EtherSwitch stacking modules (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ES-STACK-MIB::ciscoEsTransitedConfiguredVLANs OID value, configure state conditions and alerts, and monitor any Cisco Catalyst chassis with EtherSwitch stacking modules (legacy) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.5workgroupCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.14esStackCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.14.8ciscoEsVLANsCISCO-ES-STACK-MIB
1.3.6.1.4.1.9.5.14.8.6ciscoEsTransitedConfiguredVLANsCISCO-ES-STACK-MIB