All MIBs › CISCO-ERR-DISABLE-MIB › cErrDisableFeatureConfigurable
cErrDisableFeatureConfigurable
Module: CISCO-ERR-DISABLE-MIB
OID (symbolic): CISCO-ERR-DISABLE-MIB::cErrDisableFeatureConfigurable
OID (numeric): 1.3.6.1.4.1.9.9.548.1.2.1.1.2
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This object indicates whether the error-disable related configuration is configurable for this feature. If a bit is set to 1, then the corresponding error-disable configuration can be configured.
'detectionEnable' - indicates the error-disable detection can be enabled/disabled for this feature via cErrDisableFeatureDetectEnable. 'recoveryEnable' - indicates the error-disable recovery can be enabled/disabled for this feature via cErrDisableFeatureRecoveryEnable. 'recoveryInterval' - indicates the error-disable recovery Interval can be configured via cErrDisableFeatureRecoveryInterval. 'detectShutdownVlan' - indicates the error-disable detection shutdown vlan mode can be configured for this feature via cErrDisableFeatureDetectShutdownVlan. 'flapControl' - indicates the error-disable flap control can be configured via cErrDisableFeatureMaxFlapCount and cErrDisableFeatureFlapTimePeriod.
What is cErrDisableFeatureConfigurable?
A read-only bitmap showing which error-disable settings (such as detection or auto-recovery) can be configured for a given error-disable feature on the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.548.1.2.1.1.2 snmpwalk -v2c -c public <target> CISCO-ERR-DISABLE-MIB::cErrDisableFeatureConfigurable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.548.1.2.1.1.2.1 snmpget -v2c -c public <target> CISCO-ERR-DISABLE-MIB::cErrDisableFeatureConfigurable.1
Start monitoring Cisco switch/router (Layer 2 err-disable) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ERR-DISABLE-MIB::cErrDisableFeatureConfigurable OID value, configure state conditions and alerts, and monitor any Cisco switch/router (Layer 2 err-disable) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.548 | ciscoErrDisableMIB | CISCO-ERR-DISABLE-MIB |
| 1.3.6.1.4.1.9.9.548.1 | ciscoErrDisableMIBObjects | CISCO-ERR-DISABLE-MIB |
| 1.3.6.1.4.1.9.9.548.1.2 | cErrDisableFeatureObjects | CISCO-ERR-DISABLE-MIB |
| 1.3.6.1.4.1.9.9.548.1.2.1 | cErrDisableFeatureTable | CISCO-ERR-DISABLE-MIB |
| 1.3.6.1.4.1.9.9.548.1.2.1.1 | cErrDisableFeatureEntry | CISCO-ERR-DISABLE-MIB |
| 1.3.6.1.4.1.9.9.548.1.2.1.1.2 | cErrDisableFeatureConfigurable | CISCO-ERR-DISABLE-MIB |