All MIBs › CISCO-ENTITY-REDUNDANCY-MIB › ceRedunGroupRevert
ceRedunGroupRevert
Module: CISCO-ENTITY-REDUNDANCY-MIB
OID (symbolic): CISCO-ENTITY-REDUNDANCY-MIB::ceRedunGroupRevert
OID (numeric): 1.3.6.1.4.1.9.9.498.1.1.6.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: The revertive mode of the redundancy group.
nonrevertive(1)
The secondary member remains active until another switchable event takes place.
revertive(2)
When the condition that caused a switch to the secondary member has been cleared, a switch is made back to the primary member after a configured delay.
Switching should normally be revertive for the 1:n and load-sharing architectures. Switching may optionally be revertive with the 1:1 and 1+1 architectures.
This object may not be modified if the associated ceRedunGroupRowStatus object is equal to active(1).
What is ceRedunGroupRevert?
Configures whether the redundancy group operates in revertive or nonrevertive mode, determining whether the secondary member automatically switches back to primary once the fault condition clears.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.498 | ciscoEntityRedunMIB | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1 | ciscoEntityRedunMIBObjects | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1.1 | ceRedunGroup | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1.1.6 | ceRedunGroupTable | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1.1.6.1 | ceRedunGroupEntry | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1.1.6.1.6 | ceRedunGroupRevert | CISCO-ENTITY-REDUNDANCY-MIB |