All MIBs › CISCO-ENTITY-REDUNDANCY-MIB › ceRedunCommandSwitch
ceRedunCommandSwitch
Module: CISCO-ENTITY-REDUNDANCY-MIB
OID (symbolic): CISCO-ENTITY-REDUNDANCY-MIB::ceRedunCommandSwitch
OID (numeric): 1.3.6.1.4.1.9.9.498.1.3.1.2
Node type: OBJECT-TYPE
Type: CeRedunSwitchCommand
Access: read-write
Description: Allows the initiation of a redundancy switchover command for the redundant member. When a valid member is specified, the command applies to the specified member.
If the redundancy switchover command cannot be executed because an equal or higher priority request is in effect, an error is returned.
When read, this object returns the last command written which is currently still in effect or 'noCmdInEffect' if no command is currently in effect.
And for the specific case of a 'manualSwitchAway' command, some managed devices and redundancy types may do an initial switch, but may optionally not keep the switch in effect as a permanent state.
In order to determine the current switchover state of the redundancy group it is necessary to read the ceRedunMbrProtectingMbr object for the secondary member(s).
What is ceRedunCommandSwitch?
A writable control used to trigger a redundancy switchover for a specified member; the command may fail if an equal or higher priority switch request is already pending.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.498.1.3.1.2 snmpwalk -v2c -c public <target> CISCO-ENTITY-REDUNDANCY-MIB::ceRedunCommandSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.498.1.3.1.2.1 snmpget -v2c -c public <target> CISCO-ENTITY-REDUNDANCY-MIB::ceRedunCommandSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.498.1.3.1.2.1 s <value>
Start monitoring Cisco modular chassis routers/switches with redundant supervisors with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENTITY-REDUNDANCY-MIB::ceRedunCommandSwitch OID value, configure state conditions and alerts, and monitor any Cisco modular chassis routers/switches with redundant supervisors from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.498 | ciscoEntityRedunMIB | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1 | ciscoEntityRedunMIBObjects | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1.3 | ceRedunCommandTable | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1.3.1 | ceRedunCommandEntry | CISCO-ENTITY-REDUNDANCY-MIB |
| 1.3.6.1.4.1.9.9.498.1.3.1.2 | ceRedunCommandSwitch | CISCO-ENTITY-REDUNDANCY-MIB |