CISCO-ENTITY-FRU-CONTROL-MIB :: cefcMaxDefaultInLinePower

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ENTITY-FRU-CONTROL-MIBcefcMaxDefaultInLinePower

cefcMaxDefaultInLinePower

Module: CISCO-ENTITY-FRU-CONTROL-MIB

OID (symbolic): CISCO-ENTITY-FRU-CONTROL-MIB::cefcMaxDefaultInLinePower

OID (numeric): 1.3.6.1.4.1.9.9.117.1.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The system will provide power to the device connecting to the FRU if the device needs power, like an IP Phone. We call the providing power inline power.

This MIB object controls the maximum default inline power for the device connecting to the FRU in the system. If the maximum default inline power of the device is greater than the maximum value reportable by this object, then this object should report its maximum reportable value (12500) and cefcMaxDefaultHighInLinePower must be used to report the actual maximum default inline power.

What is cefcMaxDefaultInLinePower?

Reports and allows configuring the maximum default inline power a FRU port will provide to a connected powered device, such as an IP phone.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.117.1.1.3
snmpwalk -v2c -c public <target> CISCO-ENTITY-FRU-CONTROL-MIB::cefcMaxDefaultInLinePower

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.117.1.1.3.1
snmpget -v2c -c public <target> CISCO-ENTITY-FRU-CONTROL-MIB::cefcMaxDefaultInLinePower.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.117.1.1.3.1 i <value>

Start monitoring Cisco modular routers/switches (Field Replaceable Units) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENTITY-FRU-CONTROL-MIB::cefcMaxDefaultInLinePower OID value, configure state conditions and alerts, and monitor any Cisco modular routers/switches (Field Replaceable Units) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.117ciscoEntityFRUControlMIBCISCO-ENTITY-FRU-CONTROL-MIB
1.3.6.1.4.1.9.9.117.1cefcMIBObjectsCISCO-ENTITY-FRU-CONTROL-MIB
1.3.6.1.4.1.9.9.117.1.1cefcFRUPowerCISCO-ENTITY-FRU-CONTROL-MIB
1.3.6.1.4.1.9.9.117.1.1.3cefcMaxDefaultInLinePowerCISCO-ENTITY-FRU-CONTROL-MIB