All MIBs › CISCO-ENHANCED-IPSEC-FLOW-MIB › ceipSecTunStatus
ceipSecTunStatus
Module: CISCO-ENHANCED-IPSEC-FLOW-MIB
OID (symbolic): CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecTunStatus
OID (numeric): 1.3.6.1.4.1.9.9.432.1.1.2.1.54
Node type: OBJECT-TYPE
Type: CIPsecTunnelStatus
Access: read-write
Description: The status of the MIB table row.
This object can be used to bring the tunnel down or force a rekeying. When the value is set to destroy(5), the SA bundle is destroyed and this row is deleted from this table. When the value is set to rekey(6), then rekeying is forced on this tunnel.
When this MIB value is queried, the value of active(4) is always returned, if the instance exists.
This object cannot be used to create a MIB table row.
What is ceipSecTunStatus?
A read-write control for an IPsec tunnel row that reports its status and lets a manager tear down the SA bundle (destroy) or force a rekey by setting the appropriate value.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.432.1.1.2.1.54 snmpwalk -v2c -c public <target> CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecTunStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.432.1.1.2.1.54.1 snmpget -v2c -c public <target> CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecTunStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.432.1.1.2.1.54.1 s <value>
Start monitoring Cisco router/firewall/VPN concentrator terminating IPsec tunnels with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecTunStatus OID value, configure state conditions and alerts, and monitor any Cisco router/firewall/VPN concentrator terminating IPsec tunnels from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1 | ciscoEnhancedIpsecFlowMIBObjects | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.1 | ceipSecPhaseTwo | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.1.2 | ceipSecTunnelTable | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.1.2.1 | ceipSecTunnelEntry | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.1.2.1.54 | ceipSecTunStatus | CISCO-ENHANCED-IPSEC-FLOW-MIB |