All MIBs › CISCO-ENHANCED-IPSEC-FLOW-MIB › ceipSecFailTableSize
ceipSecFailTableSize
Module: CISCO-ENHANCED-IPSEC-FLOW-MIB
OID (symbolic): CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecFailTableSize
OID (numeric): 1.3.6.1.4.1.9.9.432.1.3.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The window size of the IPsec Phase-2 Failure Table.
The IPsec Phase-2 Failure Tables are implemented as a sliding window in which only the last N entries are maintained. This object is used specify the number of entries which will be maintained in the IPsec Phase-2 Failure Tables.
An implementation may choose suitable minimum and maximum values for this element based on the local policy and available resources. If an SNMP SET request specifies a value outside this window for this element, an appropriate SNMP error vode must be returned.
Setting this value to zero is equivalent to deleting all conceptual rows in the archiving table 'ceipSecFailTable' and disabling the archiving of entries in these tables.
What is ceipSecFailTableSize?
Configures the number of most recent entries (the sliding window size) retained in the IPsec Phase-2 failure history table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.432.1.3.1.1.1 snmpwalk -v2c -c public <target> CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecFailTableSize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.432.1.3.1.1.1.1 snmpget -v2c -c public <target> CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecFailTableSize.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.432.1.3.1.1.1.1 i <value>
Start monitoring Cisco router/firewall/VPN concentrator terminating IPsec tunnels with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecFailTableSize OID value, configure state conditions and alerts, and monitor any Cisco router/firewall/VPN concentrator terminating IPsec tunnels from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1 | ciscoEnhancedIpsecFlowMIBObjects | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.3 | ceipSecFailures | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.3.1 | ceipSecFailGlobal | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.3.1.1 | ceipSecFailGlobalCntl | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.3.1.1.1 | ceipSecFailTableSize | CISCO-ENHANCED-IPSEC-FLOW-MIB |