All MIBs › CISCO-ENHANCED-IPSEC-FLOW-MIB › ceipSecFailReason
ceipSecFailReason
Module: CISCO-ENHANCED-IPSEC-FLOW-MIB
OID (symbolic): CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecFailReason
OID (numeric): 1.3.6.1.4.1.9.9.432.1.3.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The reason for the failure. Possible reasons include: 1 = other 2 = internal error occurred 3 = peer encoding error 4 = proposal failure 5 = protocol use failure 6 = non-existent security association 7 = decryption failure 8 = encryption failure 9 = inbound authentication failure 10 = outbound authentication failure 11 = compression failure 12 = system capacity failure 13 = peer delete request was received 14 = contact with peer was lost 15 = sequence number rolled over 16 = operator requested termination 17 = performance utilization exceeding the threshold.
What is ceipSecFailReason?
Reports a coded reason for an IPsec Phase-2 failure, such as an internal error, peer encoding error, proposal mismatch, or a non-existent security association.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.432.1.3.2.1.2 snmpwalk -v2c -c public <target> CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecFailReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.432.1.3.2.1.2.1 snmpget -v2c -c public <target> CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecFailReason.1
Start monitoring Cisco router/firewall/VPN concentrator terminating IPsec tunnels with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecFailReason OID value, configure state conditions and alerts, and monitor any Cisco router/firewall/VPN concentrator terminating IPsec tunnels from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1 | ciscoEnhancedIpsecFlowMIBObjects | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.3 | ceipSecFailures | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.3.2 | ceipSecFailTable | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.3.2.1 | ceipSecFailEntry | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.3.2.1.2 | ceipSecFailReason | CISCO-ENHANCED-IPSEC-FLOW-MIB |