All MIBs › CISCO-ENHANCED-IPSEC-FLOW-MIB › ceipSecEndPtHistRemoteAddr2
ceipSecEndPtHistRemoteAddr2
Module: CISCO-ENHANCED-IPSEC-FLOW-MIB
OID (symbolic): CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecEndPtHistRemoteAddr2
OID (numeric): 1.3.6.1.4.1.9.9.432.1.2.3.1.17
Node type: OBJECT-TYPE
Type: InetAddress
Access: read-only
Description: The remote Endpoint's second IP address specification.
If the remote Endpoint type is single IP address, then this is the value of the IP address.
If the remote Endpoint type is IP subnet, then this is the value of the subnet mask.
If the remote Endpoint type is IP address range, then this is the value of ending IP address of the range.
If the type is an IP address, a range or a subnet, the type of the address can be inferred from cceipSecEndPtRemoteType.
What is ceipSecEndPtHistRemoteAddr2?
Reports the second IP address value for the remote IPsec tunnel endpoint in a historical entry, representing a subnet mask or end of an address range depending on the endpoint type.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.432.1.2.3.1.17 snmpwalk -v2c -c public <target> CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecEndPtHistRemoteAddr2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.432.1.2.3.1.17.1 snmpget -v2c -c public <target> CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecEndPtHistRemoteAddr2.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ceipSecEndPtHistRemoteAddr2.1
Start monitoring Cisco router/firewall/VPN concentrator terminating IPsec tunnels with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ENHANCED-IPSEC-FLOW-MIB::ceipSecEndPtHistRemoteAddr2 OID value, configure state conditions and alerts, and monitor any Cisco router/firewall/VPN concentrator terminating IPsec tunnels from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1 | ciscoEnhancedIpsecFlowMIBObjects | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.2 | ceipSecHistory | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.2.3 | ceipSecEndPtHistTable | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.2.3.1 | ceipSecEndPtHistEntry | CISCO-ENHANCED-IPSEC-FLOW-MIB |
| 1.3.6.1.4.1.9.9.432.1.2.3.1.17 | ceipSecEndPtHistRemoteAddr2 | CISCO-ENHANCED-IPSEC-FLOW-MIB |