All MIBs › CISCO-DSP-MGMT-MIB › cdspVqmControl
cdspVqmControl
Module: CISCO-DSP-MGMT-MIB
OID (symbolic): CISCO-DSP-MGMT-MIB::cdspVqmControl
OID (numeric): 1.3.6.1.4.1.9.9.86.1.4.1.1.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to disable VQM or enable either RFC 3611 RTCPXR or Extended Network Quality Metrics VQM.
disable - VQM is disabled. rfc3611Vqm - RFC 3611 RTCPXR. RTCPXR packet uses extended report block type as defined in RFC3611. xnq - Extended Network Quality Metrics.
The difference between RFC 3611 RTCPXR and Extended Network Quality Metrics is the extended report block type used in RTCPXR packets. RFC 3611 RTCPXR uses voip-metrics block type as defined in RFC3611. Extended Network Quality Metrics uses a proprietary block type.
If this object is set to 'disabled', the RTP terminations (object cmedxTermTypePkgIds in CISCO-MEGACO-EXT-MIB) on the card cannot be provisioned with the related packages, rtcpxr or pkgXnq, respectively.
If this object is set to 'rfc3611Vqm', the RTP terminations (object cmedxTermTypePkgIds in CISCO-MEGACO-EXT-MIB) on the card can include package ID 'rtcpxr (27)' and/or 'xrbm (28)', but can not include package ID 'pkgXnq (32)'.
If this object is set to 'xnq', the RTP terminations (object cmedxTermTypePkgIds in CISCO-MEGACO-EXT-MIB) on the card can include package ID 'pkgXnq (32)', but can not include 'rtcpxr (27)' or 'xrbm (28)'.
What is cdspVqmControl?
A read-write setting that selects the Voice Quality Monitoring mode for the DSP, choosing between disabling VQM, using RFC 3611 RTCPXR extended reports, or an extended network quality metrics variant.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.9 snmpwalk -v2c -c public <target> CISCO-DSP-MGMT-MIB::cdspVqmControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.9.1 snmpget -v2c -c public <target> CISCO-DSP-MGMT-MIB::cdspVqmControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.9.1 i <value>
Start monitoring Cisco voice gateway / ISR with DSP/DSPFarm voice modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DSP-MGMT-MIB::cdspVqmControl OID value, configure state conditions and alerts, and monitor any Cisco voice gateway / ISR with DSP/DSPFarm voice modules from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.86 | ciscoDspMgmtMIB | CISCO-DSP-MGMT-MIB |
| 1.3.6.1.4.1.9.9.86.1 | cdspMgmtObjects | CISCO-DSP-MGMT-MIB |
| 1.3.6.1.4.1.9.9.86.1.4 | cdspVoiceObjects | CISCO-DSP-MGMT-MIB |
| 1.3.6.1.4.1.9.9.86.1.4.1 | cdspVoiceParamTable | CISCO-DSP-MGMT-MIB |
| 1.3.6.1.4.1.9.9.86.1.4.1.1 | cdspVoiceParamEntry | CISCO-DSP-MGMT-MIB |
| 1.3.6.1.4.1.9.9.86.1.4.1.1.9 | cdspVqmControl | CISCO-DSP-MGMT-MIB |