Description: Digital Signal Processing (DSP) Management MIB module.
The MIB module monitors the DSP resource and status.

Acronyms & Terms 
================

DTMF - Dual Tone Multi-Frequency.
       DTMF uses two frequencies, the high frequency
       omponent and the low frequency component,
       to generate digit signals.
DSPFarm - DSPFarm ia a logical name given to a functionality
       which groups the DSP resources to provide certain
       service like transcoding and conferencing using DSP.
DSPFarm profile - A DSPFarm profile logically groups the DSP
       to perform service like transcoding and conferencing.
       It is uniquely identified by a profile number.
MTP  - Media Termination Point. RTP packet received by
       MTP in the incoming call leg will be regenerated
       and send out through the outgoing call leg.
transcode - Translating codec. transcoder is used to do
       codec translation. If incoming call leg negotiates
       codec-A and outgoing call leg negotiates codec-B
       then transcoder will convert received RTP packet
       from codec-A to codec-B or codec-B to codec-A.
MTP hardware session - Media termination functionality 
       with using DSP.
MTP software session - Media termination functionality
       without using DSP.
RTP  - Real-time Transport protocol.
Video Pool - A group of DSP resources dedicated to providing 
       video services.