CISCO-DSP-MGMT-MIB :: cdspTransparentIpIp

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DSP-MGMT-MIBcdspTransparentIpIp

cdspTransparentIpIp

Module: CISCO-DSP-MGMT-MIB

OID (symbolic): CISCO-DSP-MGMT-MIB::cdspTransparentIpIp

OID (numeric): 1.3.6.1.4.1.9.9.86.1.4.1.1.16

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This attribute is used to enable or disable the transparent mode when establishing a non-transcoding IP-IP connection. The attribute does not apply for the transcoding IP-IP connections. A non-transcoding connection is one where the codec and packetization period are the same between the two IP terminations. When this object is set to 'true', the non-transcoding IP-IP connection is established in such a way that the bearer stream is not interrupted by the gateway. When this object is set to 'false', the non-transcoding IP-IP connection is established in a way the gateway terminates the bearer stream at one leg, and regenerates the bearer stream at the other leg.

What is cdspTransparentIpIp?

Enables or disables transparent mode for non-transcoding IP-to-IP call connections, where codec and packetization parameters are preserved unchanged end to end; it does not apply to transcoding IP-IP connections.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.16
snmpwalk -v2c -c public <target> CISCO-DSP-MGMT-MIB::cdspTransparentIpIp

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.16.1
snmpget -v2c -c public <target> CISCO-DSP-MGMT-MIB::cdspTransparentIpIp.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.16.1 s <value>

Start monitoring Cisco voice gateway / ISR with DSP/DSPFarm voice modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DSP-MGMT-MIB::cdspTransparentIpIp OID value, configure state conditions and alerts, and monitor any Cisco voice gateway / ISR with DSP/DSPFarm voice modules from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.86ciscoDspMgmtMIBCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1cdspMgmtObjectsCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1.4cdspVoiceObjectsCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1.4.1cdspVoiceParamTableCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1.4.1.1cdspVoiceParamEntryCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1.4.1.1.16cdspTransparentIpIpCISCO-DSP-MGMT-MIB