CISCO-DSP-MGMT-MIB :: cdspRtcpRecvMultiplier

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DSP-MGMT-MIBcdspRtcpRecvMultiplier

cdspRtcpRecvMultiplier

Module: CISCO-DSP-MGMT-MIB

OID (symbolic): CISCO-DSP-MGMT-MIB::cdspRtcpRecvMultiplier

OID (numeric): 1.3.6.1.4.1.9.9.86.1.4.1.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies an approximate RTCP report interval (defined in RFC 1889) in milliseconds in which the RTCP reports should be sent to the participating members.

It specifies how many times the RTCP reports may fail before exception condition activity may be done. In the time elapse of value of this MIB object times the RTCP Report Interval specified by 'cdspRtcpTransInterval', a check will be done on a VoIP connection (which is in SENDRECV or RECVONLY xGCP modes) to see if any RTP packets have been received. If not, gateway-initiated DLCX should be sent to the Call Agent.

This object is applicable only if 'cdspRtcpControl' is set to 'true'.

What is cdspRtcpRecvMultiplier?

A read-write value specifying an approximate RTCP report interval (in milliseconds, per RFC 1889) and how many consecutive missed reports are tolerated before an exception condition is raised.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.4
snmpwalk -v2c -c public <target> CISCO-DSP-MGMT-MIB::cdspRtcpRecvMultiplier

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.4.1
snmpget -v2c -c public <target> CISCO-DSP-MGMT-MIB::cdspRtcpRecvMultiplier.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.86.1.4.1.1.4.1 i <value>

Start monitoring Cisco voice gateway / ISR with DSP/DSPFarm voice modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DSP-MGMT-MIB::cdspRtcpRecvMultiplier OID value, configure state conditions and alerts, and monitor any Cisco voice gateway / ISR with DSP/DSPFarm voice modules from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.86ciscoDspMgmtMIBCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1cdspMgmtObjectsCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1.4cdspVoiceObjectsCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1.4.1cdspVoiceParamTableCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1.4.1.1cdspVoiceParamEntryCISCO-DSP-MGMT-MIB
1.3.6.1.4.1.9.9.86.1.4.1.1.4cdspRtcpRecvMultiplierCISCO-DSP-MGMT-MIB