CISCO-DOCS-EXT-MIB :: cdxWBResilNotificationsInterval

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DOCS-EXT-MIBcdxWBResilNotificationsInterval

cdxWBResilNotificationsInterval

Module: CISCO-DOCS-EXT-MIB

OID (symbolic): CISCO-DOCS-EXT-MIB::cdxWBResilNotificationsInterval

OID (numeric): 1.3.6.1.4.1.9.9.116.1.5.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: This object specifies the interval that cdxWBResilEvent traps could be sent per cable modem. It is to avoid too many cdxWBResilEvent traps sent for a cable modem during a short period of time. The default value is 1 (second). If the value is 0, the trap cdxWBResilEvent will be sent for every wideband resiliency event. If the value is set to any value greater than 0, for the wideband resiliency events which occurred in the same specific period of time, the CMTS will send only one trap.

What is cdxWBResilNotificationsInterval?

This read-write object sets the minimum interval, in seconds, between cdxWBResilEvent traps sent for the same cable modem, throttling trap floods; a value of 0 suppresses the trap entirely and the default is 1 second.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.116.1.5.6
snmpwalk -v2c -c public <target> CISCO-DOCS-EXT-MIB::cdxWBResilNotificationsInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.116.1.5.6.1
snmpget -v2c -c public <target> CISCO-DOCS-EXT-MIB::cdxWBResilNotificationsInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.116.1.5.6.1 i <value>

Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOCS-EXT-MIB::cdxWBResilNotificationsInterval OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.116ciscoDocsExtMIBCISCO-DOCS-EXT-MIB
1.3.6.1.4.1.9.9.116.1ciscoDocsExtMIBObjectsCISCO-DOCS-EXT-MIB
1.3.6.1.4.1.9.9.116.1.5cdxWBResilObjectsCISCO-DOCS-EXT-MIB
1.3.6.1.4.1.9.9.116.1.5.6cdxWBResilNotificationsIntervalCISCO-DOCS-EXT-MIB