All MIBs › CISCO-DOCS-EXT-MIB › cdxQosCtrlUpMaxRsvdBWPercent
cdxQosCtrlUpMaxRsvdBWPercent
Module: CISCO-DOCS-EXT-MIB
OID (symbolic): CISCO-DOCS-EXT-MIB::cdxQosCtrlUpMaxRsvdBWPercent
OID (numeric): 1.3.6.1.4.1.9.9.116.1.1.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The percentage of upstream maximum reserved bandwidth to the raw bandwidth if the admission control is enabled on this upstream.
For example, if the upstream interface has raw bandwidth 1,600,000 bits/second and cdxQosCtrlUpMaxRsvdBWPercent is 200 percent, then this upstream scheduler will set the maximum of virtual reserved bandwidth capacity to 3,200,000 bits/second (1,600,000 * 2) to serve cable modems with minimum guaranteed upstream bandwidth.
The default value is 100 percent (that is, maximum reserved bandwidth is the raw bandwidth.) Whenever the admission control is changed (on to off, off to on), this value will be reset to the default value 100.
If the admission control is disabled, the value will be reset to 100 (the default value).
What is cdxQosCtrlUpMaxRsvdBWPercent?
A configurable percentage that determines the maximum reserved bandwidth allowed on an upstream relative to its raw bandwidth, used when admission control is enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.116.1.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-DOCS-EXT-MIB::cdxQosCtrlUpMaxRsvdBWPercent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.116.1.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-DOCS-EXT-MIB::cdxQosCtrlUpMaxRsvdBWPercent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.116.1.1.1.1.2.1 i <value>
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOCS-EXT-MIB::cdxQosCtrlUpMaxRsvdBWPercent OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.116 | ciscoDocsExtMIB | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1 | ciscoDocsExtMIBObjects | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1.1 | cdxQosCtrlObjects | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1.1.1 | cdxQosCtrlUpTable | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1.1.1.1 | cdxQosCtrlUpEntry | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1.1.1.1.2 | cdxQosCtrlUpMaxRsvdBWPercent | CISCO-DOCS-EXT-MIB |