All MIBs › CISCO-DOCS-EXT-MIB › cdxQosCtrlUpAdmissionCtrl
cdxQosCtrlUpAdmissionCtrl
Module: CISCO-DOCS-EXT-MIB
OID (symbolic): CISCO-DOCS-EXT-MIB::cdxQosCtrlUpAdmissionCtrl
OID (numeric): 1.3.6.1.4.1.9.9.116.1.1.1.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: The admission control status for minimum guaranteed upstream bandwidth scheduling service requests for this upstream.
When this object is set to 'true', if there is a new modem with minimum guaranteed upstream bandwidth scheduling service in its QoS class requesting to be supported in this upstream, the upstream scheduler will check the virtual reserved bandwidth remaining capacity before giving admission to this new modem. If there is not enough reserved upstream bandwidth to serve the modem's minimum guaranteed bandwidth, the registration request will be rejected.
This object is set to 'false' to disable admission control. That is, there will be no checking for bandwidth capacity and the upstream interface scheduler just admits modem registration requests.
This object is not meant for Unsolicited Grant Service(UGS) scheduling service as admission control is a requirement in this case.
What is cdxQosCtrlUpAdmissionCtrl?
A read-write setting that enables or disables admission control for minimum-guaranteed upstream bandwidth requests on a DOCSIS upstream, rejecting new cable modem service requests when insufficient bandwidth remains.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.116.1.1.1.1.1 snmpwalk -v2c -c public <target> CISCO-DOCS-EXT-MIB::cdxQosCtrlUpAdmissionCtrl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.116.1.1.1.1.1.1 snmpget -v2c -c public <target> CISCO-DOCS-EXT-MIB::cdxQosCtrlUpAdmissionCtrl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.116.1.1.1.1.1.1 s <value>
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DOCS-EXT-MIB::cdxQosCtrlUpAdmissionCtrl OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.116 | ciscoDocsExtMIB | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1 | ciscoDocsExtMIBObjects | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1.1 | cdxQosCtrlObjects | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1.1.1 | cdxQosCtrlUpTable | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1.1.1.1 | cdxQosCtrlUpEntry | CISCO-DOCS-EXT-MIB |
| 1.3.6.1.4.1.9.9.116.1.1.1.1.1 | cdxQosCtrlUpAdmissionCtrl | CISCO-DOCS-EXT-MIB |