All MIBs › CISCO-DM-MIB › dmOptimize
dmOptimize
Module: CISCO-DM-MIB
OID (symbolic): CISCO-DM-MIB::dmOptimize
OID (numeric): 1.3.6.1.4.1.9.9.302.1.1.1.1.27
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: Each 'bit' within the value of an object of this type, specifies a configured optimization type.
The value of each 'bit' (set/reset) represents whether an optimization type is configured or not.
Bit position 0, represents whether the fast-restart optimization is enabled.
Bit position 1, represents whether the selective-restart optimization is enabled.
Bit position 2, represents whether the scale-restart optimization is enabled.
If the length of an object of this type is less than 8 bytes, then the optimization types which are not represented are not considered to be part of this list, i.e., effectively, the string is extended to be of length 8 bytes by appending bytes containing x'00'. Note that this means that the zero length string represents the 'list is empty' value.
What is dmOptimize?
A read-write bitmask indicating which fabric optimization types (such as fast-restart) are currently configured on the switch, with each bit position enabling or disabling a specific optimization.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.302.1.1.1.1.27 snmpwalk -v2c -c public <target> CISCO-DM-MIB::dmOptimize
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.302.1.1.1.1.27.1 snmpget -v2c -c public <target> CISCO-DM-MIB::dmOptimize.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.302.1.1.1.1.27.1 s <value>
Start monitoring Cisco MDS/Nexus Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DM-MIB::dmOptimize OID value, configure state conditions and alerts, and monitor any Cisco MDS/Nexus Fibre Channel SAN switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.302 | ciscoDmMIB | CISCO-DM-MIB |
| 1.3.6.1.4.1.9.9.302.1 | ciscoDmMIBObjects | CISCO-DM-MIB |
| 1.3.6.1.4.1.9.9.302.1.1 | dmConfiguration | CISCO-DM-MIB |
| 1.3.6.1.4.1.9.9.302.1.1.1 | dmTable | CISCO-DM-MIB |
| 1.3.6.1.4.1.9.9.302.1.1.1.1 | dmEntry | CISCO-DM-MIB |
| 1.3.6.1.4.1.9.9.302.1.1.1.1.27 | dmOptimize | CISCO-DM-MIB |