All MIBs › CISCO-DM-MIB › dmFabricChangeNotify

dmFabricChangeNotify

OID (symbolic): CISCO-DM-MIB::dmFabricChangeNotify

OID (numeric): 1.3.6.1.4.1.9.9.302.1.3.0.3

Node type: NOTIFICATION-TYPE

Description: This notification is sent whenever a switch sends or receives a Build Fabric (BF) or a ReConfigure Fabric (RCF) message on a VSAN.

A switch can receive or issue a BuildFabric (BF) or a ReConfigureFabric (RCF) message under following conditions: - A new link causes two disjoint fabrics in a VSAN to merge into one fabric. The sent/received message is BF if the Domain ID lists on the disjoint fabric does not overlap and it is RCF if they overlap. - An upsteam principal ISL which connects to Principal switch and other switches in a VSAN fails. BF is issued to see if there is an alternative path to the Principal Switch. If not paths exit, then an RCF is issued. - A switch asks for a different set of Domain IDs than the currently assigned list, the Principal switch would issue an RCF.

The notification is not sent if a 'dmNewPrincipalSwitchNotify' notification is sent for the same transition. This notification contains the vsanIndex of the VSAN on which RCF was issued.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' CISCO-DM-MIB::dmFabricChangeNotify
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.302.1.3.0.3

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:56123->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (357736251) 41 days, 9:42:42.51
  SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-DM-MIB::dmFabricChangeNotify

Start monitoring Cisco MDS/Nexus Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DM-MIB::dmFabricChangeNotify OID value, configure state conditions and alerts, and monitor any Cisco MDS/Nexus Fibre Channel SAN switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.9	cisco	CAT2600-MIB
1.3.6.1.4.1.9.9	ciscoMgmt	CISCO-SMI

Numeric OID	Name	Module
1.3.6.1.4.1.9.9.302	ciscoDmMIB	CISCO-DM-MIB
1.3.6.1.4.1.9.9.302.1	ciscoDmMIBObjects	CISCO-DM-MIB
1.3.6.1.4.1.9.9.302.1.3	dmNotificationPrefix	CISCO-DM-MIB
1.3.6.1.4.1.9.9.302.1.3.0	dmNotification	CISCO-DM-MIB
1.3.6.1.4.1.9.9.302.1.3.0.3	dmFabricChangeNotify	CISCO-DM-MIB

CISCO-DM-MIB :: dmFabricChangeNotify

dmFabricChangeNotify

Module

This MIB depends on