CISCO-DLSW-MIB :: ciscoDlswIfSapList

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DLSW-MIBciscoDlswIfSapList

ciscoDlswIfSapList

Module: CISCO-DLSW-MIB

OID (symbolic): CISCO-DLSW-MIB::ciscoDlswIfSapList

OID (numeric): 1.3.6.1.4.1.9.10.9.1.3.1.1.3

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: The SAP list indicates which SAPs are allowed to be data link switched through this interface. This list has the same format described for ciscoDlswTConnConfigSapList.

It is up to the implementation to determine when changes to this object take effect. Turning off a particular SAP can destroy active circuits that are using that SAP. The implementation may reject such changes until there are no active circuits if it so chooses. In this case, it is up to the management station to close the circuits first, using ciscoDlswCircuitState.

This implementation of DLSw does not maintain a SAP list per interface. To limit traffic based upon the SAP, inteface access-lists should be applied, and their associated mib objects consulted.

The DEFVAL below indicates support for all SAPs.

What is ciscoDlswIfSapList?

Reports the list of SAPs (Service Access Points) permitted to be data-link switched over a given DLSw interface, controlling which traffic types are forwarded through it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.9.1.3.1.1.3
snmpwalk -v2c -c public <target> CISCO-DLSW-MIB::ciscoDlswIfSapList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.9.1.3.1.1.3.1
snmpget -v2c -c public <target> CISCO-DLSW-MIB::ciscoDlswIfSapList.1

Start monitoring Cisco routers (Data Link Switching, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DLSW-MIB::ciscoDlswIfSapList OID value, configure state conditions and alerts, and monitor any Cisco routers (Data Link Switching, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.9ciscoDlswMIBCISCO-DLSW-MIB
1.3.6.1.4.1.9.10.9.1ciscoDlswMIBObjectsCISCO-DLSW-MIB
1.3.6.1.4.1.9.10.9.1.3ciscoDlswInterfaceCISCO-DLSW-MIB
1.3.6.1.4.1.9.10.9.1.3.1ciscoDlswIfTableCISCO-DLSW-MIB
1.3.6.1.4.1.9.10.9.1.3.1.1ciscoDlswIfEntryCISCO-DLSW-MIB
1.3.6.1.4.1.9.10.9.1.3.1.1.3ciscoDlswIfSapListCISCO-DLSW-MIB