All MIBs › CISCO-DLSW-MIB › ciscoDlswCircuitState
ciscoDlswCircuitState
Module: CISCO-DLSW-MIB
OID (symbolic): CISCO-DLSW-MIB::ciscoDlswCircuitState
OID (numeric): 1.3.6.1.4.1.9.10.9.1.5.2.1.17
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current state of this circuit. The implementation may choose to keep entries for some period of time after circuit disconnect, so the network management station can gather the time and cause of disconnection.
While all of the specified values may be returned from a GET operation, the only SETable value is `disconnectPending'. When this value is set, DLSw should perform the appropriate action given its previous state (e.g., send HALT_DL if the state was `connected') to bring the circuit down to the `disconnected' state. Both the partner DLSw and local end station(s) should be notified as appropriate.
This MIB provides no facility to re-establish a disconnected circuit, because in DLSw this should be an end station-driven function.
What is ciscoDlswCircuitState?
Reports the current operational state of a DLSw circuit (such as connected or disconnected), allowing entries to persist briefly after disconnect so management stations can review disconnect timing and cause.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.9.1.5.2.1.17 snmpwalk -v2c -c public <target> CISCO-DLSW-MIB::ciscoDlswCircuitState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.9.1.5.2.1.17.1 snmpget -v2c -c public <target> CISCO-DLSW-MIB::ciscoDlswCircuitState.1
Start monitoring Cisco routers (Data Link Switching, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DLSW-MIB::ciscoDlswCircuitState OID value, configure state conditions and alerts, and monitor any Cisco routers (Data Link Switching, legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.9 | ciscoDlswMIB | CISCO-DLSW-MIB |
| 1.3.6.1.4.1.9.10.9.1 | ciscoDlswMIBObjects | CISCO-DLSW-MIB |
| 1.3.6.1.4.1.9.10.9.1.5 | ciscoDlswCircuit | CISCO-DLSW-MIB |
| 1.3.6.1.4.1.9.10.9.1.5.2 | ciscoDlswCircuitTable | CISCO-DLSW-MIB |
| 1.3.6.1.4.1.9.10.9.1.5.2.1 | ciscoDlswCircuitEntry | CISCO-DLSW-MIB |
| 1.3.6.1.4.1.9.10.9.1.5.2.1.17 | ciscoDlswCircuitState | CISCO-DLSW-MIB |