CISCO-CPRI-MIB :: coiCpriControllerNegotiatedRate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-CPRI-MIBcoiCpriControllerNegotiatedRate

coiCpriControllerNegotiatedRate

Module: CISCO-CPRI-MIB

OID (symbolic): CISCO-CPRI-MIB::coiCpriControllerNegotiatedRate

OID (numeric): 1.3.6.1.4.1.9.9.9999.1.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object gives the current negotiated rate of the cpri controller, valid values are - rateNone(0): No valid negotiated rate rate614Mbps(1): The negotiated rate is 614 Mbps rate1228Mbps(2): The negotiated rate is 1228 Mbps rate2457Mbps(3): The negotiated rate is 2457 Mbps rate3072Mbps(4): The negotiated rate is 3072 Mbps rate4915Mbps(5): The negotiated rate is 4915 Mbps rate6144Mbps(6): The negotiated rate is 6144 Mbps rate9830Mbps(7): The negotiated rate is 9830 Mbps rate8110Mbps(8): The negotiated rate is 8110 Mbps rate10137Mbps(9): The negotiated rate is 10137 Mbps rate12165Mbps(10): The negotiated rate is 12165 Mbps rate24330Mbps(11): The negotiated rate is 24330 Mbps

What is coiCpriControllerNegotiatedRate?

Reports the CPRI line rate actually negotiated on this controller port, such as 614 Mbps, 1228 Mbps, or 2457 Mbps, or none if no rate has been negotiated.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.9999.1.1.1.1.3
snmpwalk -v2c -c public <target> CISCO-CPRI-MIB::coiCpriControllerNegotiatedRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.9999.1.1.1.1.3.1
snmpget -v2c -c public <target> CISCO-CPRI-MIB::coiCpriControllerNegotiatedRate.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> coiCpriControllerNegotiatedRate.1

Start monitoring Cisco mobile fronthaul / RAN aggregation equipment (CPRI) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CPRI-MIB::coiCpriControllerNegotiatedRate OID value, configure state conditions and alerts, and monitor any Cisco mobile fronthaul / RAN aggregation equipment (CPRI) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.9999ciscoAal5ExtMIBCISCO-AAL5-EXT-MIB
1.3.6.1.4.1.9.9.9999.1ciscoAal5ExtMIBObjectsCISCO-AAL5-EXT-MIB
1.3.6.1.4.1.9.9.9999.1.1cAal5ExtConnectionsCISCO-AAL5-EXT-MIB
1.3.6.1.4.1.9.9.9999.1.1.1cAal5ExtVccTableCISCO-AAL5-EXT-MIB
1.3.6.1.4.1.9.9.9999.1.1.1.1cAal5ExtVccEntryCISCO-AAL5-EXT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.9.9999.1.1.1.1.3coiCpriControllerNegotiatedRateCISCO-CPRI-MIB