CISCO-CAS-IF-MIB :: ccasVoiceCfgConnectionMode

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-CAS-IF-MIBccasVoiceCfgConnectionMode

ccasVoiceCfgConnectionMode

Module: CISCO-CAS-IF-MIB

OID (symbolic): CISCO-CAS-IF-MIB::ccasVoiceCfgConnectionMode

OID (numeric): 1.3.6.1.4.1.9.9.85.1.4.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The object indicates the connection mode of the interface. normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface acts in trunking mode. trunking mode causes two interfaces (on either the same or different routers) to be always conferenced together, and for telephony signaling to be passed transparently through the VoIP system rather than trapped and interpreted by the session application on the router(s). plar - the interface acts in PLAR (private line automatic ringdown) mode. PLAR is handled by associating a peer directly with an interface such that when the interface goes off-hook, that peer is used to setup the second call leg and conference them together without the caller having to dial any digits.

What is ccasVoiceCfgConnectionMode?

Read-write setting indicating whether the interface operates in normal call-handling mode or trunking mode, where two interfaces are linked directly.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.85.1.4.1.1.8
snmpwalk -v2c -c public <target> CISCO-CAS-IF-MIB::ccasVoiceCfgConnectionMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.85.1.4.1.1.8.1
snmpget -v2c -c public <target> CISCO-CAS-IF-MIB::ccasVoiceCfgConnectionMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.85.1.4.1.1.8.1 i <value>

Start monitoring Cisco voice gateway or router with T1/E1 CAS trunk interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CAS-IF-MIB::ccasVoiceCfgConnectionMode OID value, configure state conditions and alerts, and monitor any Cisco voice gateway or router with T1/E1 CAS trunk interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.85ciscoCasIfMIBCISCO-CAS-IF-MIB
1.3.6.1.4.1.9.9.85.1ccasIfObjectsCISCO-CAS-IF-MIB
1.3.6.1.4.1.9.9.85.1.4ccasVoiceCfgObjectsCISCO-CAS-IF-MIB
1.3.6.1.4.1.9.9.85.1.4.1ccasVoiceCfgTableCISCO-CAS-IF-MIB
1.3.6.1.4.1.9.9.85.1.4.1.1ccasVoiceCfgEntryCISCO-CAS-IF-MIB
1.3.6.1.4.1.9.9.85.1.4.1.1.8ccasVoiceCfgConnectionModeCISCO-CAS-IF-MIB