All MIBs › CISCO-CABLE-WIDEBAND-MIB › ccwbWBCmStatusValue
ccwbWBCmStatusValue
Module: CISCO-CABLE-WIDEBAND-MIB
OID (symbolic): CISCO-CABLE-WIDEBAND-MIB::ccwbWBCmStatusValue
OID (numeric): 1.3.6.1.4.1.9.9.479.1.6.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current WB Cable Modem connectivity state, as specified in the RF Interface Specification. Returned status information is the WCM status as assumed by the WCMTS, and indicates the following events:
The enumerations are: offline(1) : modem considered offline. others(2) : states is in ccwbWBCmStatusValue. initRangingRcvd(3) : modem sent initial ranging. initDhcpReqRcvd(4) : dhcp request received. onlineNetAccessDisabled(5): modem registered, but network access for the WCM is disabled. onlineKekAssigned(6) : modem registered, BPI enabled and KEK assigned. onlineTekAssigned(7) : modem registered, BPI enabled and TEK assigned. rejectBadMic(8) : modem did attempt to register but registration was refused due to bad mic. rejectBadCos(9) : modem did attempt to register but registration was refused due to bad COS. kekRejected(10) : KEK modem key assignment rejected. tekRejected(11) : TEK modem key assignment rejected. online(12) : modem registered, enabled for data. initTftpPacketRcvd(13) : tftp packet received and option file transfer started. initTodRquestRcvd(14) : Time of the Day (TOD) request received. reset(15) : modem is resetting. rangingInProgress(16) : initial ranging is in progress. dhcpGotIpAddr(17) : modem has got an IP address rejStaleConfig(18) : modem did attempt to register but registration was refused due to stale Config. rejIpSpoof(19) : modem did attempt to register but registration was refused due to IP Spoof. rejClassFail(20) : modem did attempt to register but registration was refused due to Class failure. rejRegNack(21) : modem did attempt to register but no acknowledgement was received. bpiKekExpired(22) : KEK modem key assignment expired. bpiTekExpired(23) : TEK modem key assignment expired. shutdown(24) : modem is in shutdown state. channelChgInitRangingRcvd(25) : modem sent initial ranging during channel change. channelChgRangingInProgress(26) : initial ranging is in progress during channel change. wbOnline(27) : Wideband modem is online. wbOnlinePrivacy(28) : Wideband modem is online Privacy enabled. wbOnlineKekAssigned(29) : Wideband modem is online and KEK assigned. wbOnlineTekAssigned(30) : Wideband modem is online and TEK assigned. wbOnlineNetAccessDis(31) : Wideband modem registered but Network access disabled. wbKekReject(32) : KEK wideband modem key assignment rejected. wbTekReject(33) : TEK wideband modem key assignment rejected. wbNetAccessDisReject(34) : wideband modem rejected - Net access disabled. wbPrivacyEnabReject(35) : wideband modem rejected Privacy enabled. wbKekExpire(36) : KEK Wideband modem key assignment expired. wbTekExpire(37) : TEK wideband modem key assignment rejected. wbNetAccessDisExpire(38) : wideband modem expire - Network access disabled. wbPrivacyEnabExpire(39) : wideband modem expire - Privacy enabled.
This ccwbWBCmStatusValue could return initRangingRcvd(3) or rangingInProgress(16) when the ccwbWBCmStatusValue is ranging(2).
This ccwbWBCmStatusValue will return others(2) when the ccwbWBCmStatusValue states is either rangingAborted(3), rangingComplete(4), and ipComplete(5).
This ccwbWBCmStatusValue could return wbonline(27), or onlineNetAccessDisabled(5) for WCM with BPI disabled, or onlineNetAccessDisabled(5) or onlineTekAssigned(7) for WCM with BPI enabled, when the ccwbWBCmStatusValue is registrationComplete(6).
This ccwbWBCmStatusValue could return either rejectBadMic(8), rejectBadCos(9) rejStaleConfig(19) or rejRegNack(22) when the ccwbWBCmStatusValue is accessDenied(7) for possible reasons of cable modem registration abort.
This ccwbWBCmStatusValue could return either onlineKekAssigned(6), kekRejected(10), tekRejected(11), or online(12) for the WCM with BPI enabled when the ccwbWBCmStatusValue is registeredBPIInitializing(9).
The state rejectBadCos(9) is not applicable for DOCSIS1.1 modems. The WCMTS only needs to report states it is able to detect.
What is ccwbWBCmStatusValue?
Reports the current connectivity state of a wideband cable modem as tracked by the CMTS, such as offline or other RF interface specification states.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.479.1.6.1.1 snmpwalk -v2c -c public <target> CISCO-CABLE-WIDEBAND-MIB::ccwbWBCmStatusValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.479.1.6.1.1.1 snmpget -v2c -c public <target> CISCO-CABLE-WIDEBAND-MIB::ccwbWBCmStatusValue.1
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CABLE-WIDEBAND-MIB::ccwbWBCmStatusValue OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.479 | ciscoCableWidebandMIB | CISCO-CABLE-WIDEBAND-MIB |
| 1.3.6.1.4.1.9.9.479.1 | ciscoCableWidebandMIBObjects | CISCO-CABLE-WIDEBAND-MIB |
| 1.3.6.1.4.1.9.9.479.1.6 | ccwbWBCmStatusTable | CISCO-CABLE-WIDEBAND-MIB |
| 1.3.6.1.4.1.9.9.479.1.6.1 | ccwbWBCmStatusEntry | CISCO-CABLE-WIDEBAND-MIB |
| 1.3.6.1.4.1.9.9.479.1.6.1.1 | ccwbWBCmStatusValue | CISCO-CABLE-WIDEBAND-MIB |