All MIBs › CISCO-CABLE-METERING-MIB › ccmtrCollectionSrcIfIndex
ccmtrCollectionSrcIfIndex
Module: CISCO-CABLE-METERING-MIB
OID (symbolic): CISCO-CABLE-METERING-MIB::ccmtrCollectionSrcIfIndex
OID (numeric): 1.3.6.1.4.1.9.9.424.1.1.9
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-write
Description: The ifIndex of the interface which will be used as the source interface for the billing packets. When ccmtrCollectionType is 'local', the IP address of this source interface will be used as the CMTS IP address in the billing packets. When ccmtrCollectionType is 'stream', the source IP address of the billing packets as well as the CMTS IP address in billing packets will be changed to the IP address of this interface. In both the cases, the mac address of the source interface would be used in the billing packet headers. A value of zero on this object indicates that the source interface is not specifically configured and the system will determine the source interface to use for billing packets dynamically. This object can only be set when ccmtrCollectionType is either 'local' or 'stream'.
What is ccmtrCollectionSrcIfIndex?
A read-write object identifying the ifIndex of the interface whose IP address is used as the source/CMTS address in billing packets, applicable when collection type is 'local' or 'stream'.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.424.1.1.9 snmpwalk -v2c -c public <target> CISCO-CABLE-METERING-MIB::ccmtrCollectionSrcIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.424.1.1.9.1 snmpget -v2c -c public <target> CISCO-CABLE-METERING-MIB::ccmtrCollectionSrcIfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.424.1.1.9.1 s <value>
Start monitoring Cisco CMTS (Cable Modem Termination System) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CABLE-METERING-MIB::ccmtrCollectionSrcIfIndex OID value, configure state conditions and alerts, and monitor any Cisco CMTS (Cable Modem Termination System) platforms from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.424 | ciscoCableMeteringMIB | CISCO-CABLE-METERING-MIB |
| 1.3.6.1.4.1.9.9.424.1 | ciscoCableMeteringMIBObjects | CISCO-CABLE-METERING-MIB |
| 1.3.6.1.4.1.9.9.424.1.1 | ccmtrMeteringConfig | CISCO-CABLE-METERING-MIB |
| 1.3.6.1.4.1.9.9.424.1.1.9 | ccmtrCollectionSrcIfIndex | CISCO-CABLE-METERING-MIB |