CISCO-BRIDGE-EXT-MIB :: cbeDot1dStaticStatus

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-BRIDGE-EXT-MIB › cbeDot1dStaticStatus

cbeDot1dStaticStatus

Module: CISCO-BRIDGE-EXT-MIB

OID (symbolic): CISCO-BRIDGE-EXT-MIB::cbeDot1dStaticStatus

OID (numeric): 1.3.6.1.4.1.9.9.401.1.2.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so differ from the following values. invalid(2) - writing this value to the object removes the corresponding entry. permanent(3) - this entry is currently in use and will remain so after the next reset of the bridge. deleteOnReset(4) - this entry is currently in use and will remain so until the next reset of the bridge. deleteOnTimeout(5) - this entry is currently in use and will remain so until it is aged out.

What is cbeDot1dStaticStatus?

This read-write object reports the status of a static MAC forwarding table entry, such as whether it is in use, permanent, or being removed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.401.1.2.1.1.6
snmpwalk -v2c -c public <target> CISCO-BRIDGE-EXT-MIB::cbeDot1dStaticStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.401.1.2.1.1.6.1
snmpget -v2c -c public <target> CISCO-BRIDGE-EXT-MIB::cbeDot1dStaticStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.401.1.2.1.1.6.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cbeDot1dStaticStatus.1

Start monitoring Cisco Catalyst switch (VLAN-capable Layer 2 switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BRIDGE-EXT-MIB::cbeDot1dStaticStatus OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (VLAN-capable Layer 2 switch) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.401ciscoBridgeExtMIBCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1cbExtMIBObjectsCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1.2cbeDot1dStaticCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1.2.1cbeDot1dStaticTableCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1.2.1.1cbeDot1dStaticEntryCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1.2.1.1.6cbeDot1dStaticStatusCISCO-BRIDGE-EXT-MIB