CISCO-BRIDGE-EXT-MIB :: cbeDot1dStaticAllowedToGoTo

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-BRIDGE-EXT-MIB › cbeDot1dStaticAllowedToGoTo

cbeDot1dStaticAllowedToGoTo

Module: CISCO-BRIDGE-EXT-MIB

OID (symbolic): CISCO-BRIDGE-EXT-MIB::cbeDot1dStaticAllowedToGoTo

OID (numeric): 1.3.6.1.4.1.9.9.401.1.2.1.1.5

Node type: OBJECT-TYPE

Type: CiscoPortList

Access: read-write

Description: A set of ports in a specific VLAN, in a specific range of bridge port number, to which frames received from a specific port, destined for a specific MAC address are allowed to be forwarded.

An entry in this table with the index value of cbeDot1dStaticPortRangeIndex being 'oneto2K' and instance value of the corresponding cbeDot1dStaticAllowedToGoTo being zero-length octet string indicates that frames received in the VLAN as specified by this entry's cbeDot1dVlanIndex, from a port as specified by this entry's cbeDot1dStaticReceivePort, and destined to the MAC address as specified by this entry's cbeDot1dStaticAddress, are not allowed to be forwarded to any of the ports in this VLAN.

What is cbeDot1dStaticAllowedToGoTo?

This read-write object defines the set of ports in a VLAN to which frames from a specific port destined for a specific MAC address are statically allowed to be forwarded.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.401.1.2.1.1.5
snmpwalk -v2c -c public <target> CISCO-BRIDGE-EXT-MIB::cbeDot1dStaticAllowedToGoTo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.401.1.2.1.1.5.1
snmpget -v2c -c public <target> CISCO-BRIDGE-EXT-MIB::cbeDot1dStaticAllowedToGoTo.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.401.1.2.1.1.5.1 s <value>

Start monitoring Cisco Catalyst switch (VLAN-capable Layer 2 switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-BRIDGE-EXT-MIB::cbeDot1dStaticAllowedToGoTo OID value, configure state conditions and alerts, and monitor any Cisco Catalyst switch (VLAN-capable Layer 2 switch) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.401ciscoBridgeExtMIBCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1cbExtMIBObjectsCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1.2cbeDot1dStaticCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1.2.1cbeDot1dStaticTableCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1.2.1.1cbeDot1dStaticEntryCISCO-BRIDGE-EXT-MIB
1.3.6.1.4.1.9.9.401.1.2.1.1.5cbeDot1dStaticAllowedToGoToCISCO-BRIDGE-EXT-MIB