CISCO-ATM-TRAFFIC-MIB :: atmTrafficDerivedServCategory

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-ATM-TRAFFIC-MIB › atmTrafficDerivedServCategory

atmTrafficDerivedServCategory

Module: CISCO-ATM-TRAFFIC-MIB

OID (symbolic): CISCO-ATM-TRAFFIC-MIB::atmTrafficDerivedServCategory

OID (numeric): 1.3.6.1.4.1.9.10.11.1.2.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object indicates the Service Category
derived from the Traffic Descriptor. If the
object atmTrafficExplicitServCategory has
a defined value, then this object mirrors
that value. If Explicit Service Category
has the value notDef, then this object
reflects the Service Category derived from
the Traffic Descriptor Type as follows:

Traffic Descriptor       Service
    Type                 Category
-----------------------------------------
atmNoTrafficDescriptor   ubr

atmNoClpMcr              abr
atmNoClpMcrCdvt          abr

atmNoClpNoScr      --|
atmClpNoTaggingNoScr |-- cbr
atmClpTaggingNoScr   |
atmNoClpNoScrCdvt  --|

atmNoClpScr        --|
atmClpNoTaggingScr   |-- vbr-rt
atmClpScrMbsCdvt     |
atmNoClpScrMbsCdvt   |
atmClpTaggingScr   --|
-----------------------------------------

What is atmTrafficDerivedServCategory?

This read-only value reports the ATM Service Category derived for a connection; it mirrors the explicitly configured service category when one is set, or is inferred from the traffic descriptor otherwise.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.11.1.2.1.1.2
snmpwalk -v2c -c public <target> CISCO-ATM-TRAFFIC-MIB::atmTrafficDerivedServCategory

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.11.1.2.1.1.2.1
snmpget -v2c -c public <target> CISCO-ATM-TRAFFIC-MIB::atmTrafficDerivedServCategory.1

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-TRAFFIC-MIB::atmTrafficDerivedServCategory OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.11ciscoAtmTrafficExtMIBCISCO-ATM-TRAFFIC-MIB
1.3.6.1.4.1.9.10.11.1ciscoAtmTrafficExtMIBObjectsCISCO-ATM-TRAFFIC-MIB
1.3.6.1.4.1.9.10.11.1.2ciscoAtmTrafficTableExtCISCO-ATM-TRAFFIC-MIB
1.3.6.1.4.1.9.10.11.1.2.1atmTrafficDescrParamExtTableCISCO-ATM-TRAFFIC-MIB
1.3.6.1.4.1.9.10.11.1.2.1.1atmTrafficDescrParamExtEntryCISCO-ATM-TRAFFIC-MIB
1.3.6.1.4.1.9.10.11.1.2.1.1.2atmTrafficDerivedServCategoryCISCO-ATM-TRAFFIC-MIB