CISCO-ATM-SWITCH-FR-IWF-MIB :: casfVcEndptRxNegTrafficDescrRow

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-SWITCH-FR-IWF-MIBcasfVcEndptRxNegTrafficDescrRow

casfVcEndptRxNegTrafficDescrRow

Module: CISCO-ATM-SWITCH-FR-IWF-MIB

OID (symbolic): CISCO-ATM-SWITCH-FR-IWF-MIB::casfVcEndptRxNegTrafficDescrRow

OID (numeric): 1.3.6.1.4.1.9.9.112.1.2.1.1.4

Node type: OBJECT-TYPE

Type: CasfTrafficDescrRow

Access: read-only

Description: Identifies the entry in the casfTrafficDescrTable which contains negotiated traffic parameters applied to the receive direction of this connection end-point.

This object is not instantiated if this is not the calling side of a soft VC, or if there is no traffic negotiation.

What is casfVcEndptRxNegTrafficDescrRow?

This read-only pointer identifies the traffic descriptor row holding the negotiated receive-direction parameters for this endpoint, and it is explicitly not instantiated unless this is the calling side of a soft VC and traffic negotiation actually occurred. Its absence on a plain hard PVC or on the called side of a soft VC isn't a fault, it simply means there was nothing to negotiate in the first place. Querying this object on a static PVC endpoint correctly returns no instance, while querying it on the calling side of a negotiated ABR soft VC returns the rate the far end actually granted.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.112.1.2.1.1.4
snmpwalk -v2c -c public <target> CISCO-ATM-SWITCH-FR-IWF-MIB::casfVcEndptRxNegTrafficDescrRow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.112.1.2.1.1.4.1
snmpget -v2c -c public <target> CISCO-ATM-SWITCH-FR-IWF-MIB::casfVcEndptRxNegTrafficDescrRow.1

Start monitoring Cisco ATM switch (BPX/MGX series) with Frame Relay interworking with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-SWITCH-FR-IWF-MIB::casfVcEndptRxNegTrafficDescrRow OID value, configure state conditions and alerts, and monitor any Cisco ATM switch (BPX/MGX series) with Frame Relay interworking from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.112ciscoAtmSwitchFrIwfMIBCISCO-ATM-SWITCH-FR-IWF-MIB
1.3.6.1.4.1.9.9.112.1ciscoAtmSwitchFrIwfMIBObjectsCISCO-ATM-SWITCH-FR-IWF-MIB
1.3.6.1.4.1.9.9.112.1.2casfFrVCCISCO-ATM-SWITCH-FR-IWF-MIB
1.3.6.1.4.1.9.9.112.1.2.1casfVcEndptTableCISCO-ATM-SWITCH-FR-IWF-MIB
1.3.6.1.4.1.9.9.112.1.2.1.1casfVcEndptEntryCISCO-ATM-SWITCH-FR-IWF-MIB
1.3.6.1.4.1.9.9.112.1.2.1.1.4casfVcEndptRxNegTrafficDescrRowCISCO-ATM-SWITCH-FR-IWF-MIB