All MIBs › CISCO-ATM-SWITCH-FR-IWF-MIB › casfFrLmiUserN391
casfFrLmiUserN391
Module: CISCO-ATM-SWITCH-FR-IWF-MIB
OID (symbolic): CISCO-ATM-SWITCH-FR-IWF-MIB::casfFrLmiUserN391
OID (numeric): 1.3.6.1.4.1.9.9.112.1.3.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage.
What is casfFrLmiUserN391?
This read-write value sets the number of status-enquiry intervals that pass before the port issues a full status enquiry listing every PVC's state, rather than a lighter periodic keepalive. Setting it very high delays how quickly a newly added or removed PVC's status gets reflected to the far end, while setting it very low, such as 1, makes every enquiry a full status message, using more signaling bandwidth than necessary. With N391 set to 6 and a T391 of 10 seconds, a full status enquiry listing all PVCs goes out roughly once a minute instead of every 10 seconds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.112.1.3.1.1.3 snmpwalk -v2c -c public <target> CISCO-ATM-SWITCH-FR-IWF-MIB::casfFrLmiUserN391
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.112.1.3.1.1.3.1 snmpget -v2c -c public <target> CISCO-ATM-SWITCH-FR-IWF-MIB::casfFrLmiUserN391.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.112.1.3.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> casfFrLmiUserN391.1
Start monitoring Cisco ATM switch (BPX/MGX series) with Frame Relay interworking with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-SWITCH-FR-IWF-MIB::casfFrLmiUserN391 OID value, configure state conditions and alerts, and monitor any Cisco ATM switch (BPX/MGX series) with Frame Relay interworking from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.112 | ciscoAtmSwitchFrIwfMIB | CISCO-ATM-SWITCH-FR-IWF-MIB |
| 1.3.6.1.4.1.9.9.112.1 | ciscoAtmSwitchFrIwfMIBObjects | CISCO-ATM-SWITCH-FR-IWF-MIB |
| 1.3.6.1.4.1.9.9.112.1.3 | casfFrInterface | CISCO-ATM-SWITCH-FR-IWF-MIB |
| 1.3.6.1.4.1.9.9.112.1.3.1 | casfFrLmiTable | CISCO-ATM-SWITCH-FR-IWF-MIB |
| 1.3.6.1.4.1.9.9.112.1.3.1.1 | casfFrLmiEntry | CISCO-ATM-SWITCH-FR-IWF-MIB |
| 1.3.6.1.4.1.9.9.112.1.3.1.1.3 | casfFrLmiUserN391 | CISCO-ATM-SWITCH-FR-IWF-MIB |