CISCO-ATM-IF-MIB :: ciscoAtmIfUniType

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-IF-MIBciscoAtmIfUniType

ciscoAtmIfUniType

Module: CISCO-ATM-IF-MIB

OID (symbolic): CISCO-ATM-IF-MIB::ciscoAtmIfUniType

OID (numeric): 1.3.6.1.4.1.9.10.14.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The type of User to Network interface is either private or public. If ciscoAtmIfType is not uni then ciscoAtmIfUniType value should be ignored.

What is ciscoAtmIfUniType?

A read-write setting specifying whether a User-to-Network Interface (UNI) is private or public; the value is meaningless if the interface type is not UNI.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.14.1.1.1.3
snmpwalk -v2c -c public <target> CISCO-ATM-IF-MIB::ciscoAtmIfUniType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.14.1.1.1.3.1
snmpget -v2c -c public <target> CISCO-ATM-IF-MIB::ciscoAtmIfUniType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.14.1.1.1.3.1 i <value>

Start monitoring Cisco ATM switch/router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-IF-MIB::ciscoAtmIfUniType OID value, configure state conditions and alerts, and monitor any Cisco ATM switch/router from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.14ciscoAtmIfMIBCISCO-ATM-IF-MIB
1.3.6.1.4.1.9.10.14.1ciscoAtmIfMIBObjectsCISCO-ATM-IF-MIB
1.3.6.1.4.1.9.10.14.1.1ciscoAtmIfTableCISCO-ATM-IF-MIB
1.3.6.1.4.1.9.10.14.1.1.1ciscoAtmIfEntryCISCO-ATM-IF-MIB
1.3.6.1.4.1.9.10.14.1.1.1.3ciscoAtmIfUniTypeCISCO-ATM-IF-MIB