CISCO-ATM-IF-MIB :: ciscoAtmIfUniSignallingVersion

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-IF-MIBciscoAtmIfUniSignallingVersion

ciscoAtmIfUniSignallingVersion

Module: CISCO-ATM-IF-MIB

OID (symbolic): CISCO-ATM-IF-MIB::ciscoAtmIfUniSignallingVersion

OID (numeric): 1.3.6.1.4.1.9.10.14.1.1.1.21

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The version of UNI signalling that is currently being used on the interface. The appropriate value, either atmfUni3Dot0, atmfUni3Dot1 or atmfUni4Dot0, is used when the interface is an UNI or IISP interface. The value notApplicable is used when the interface is a PNNI interface or when signalling is disabled. This may reflect a manually configured value for the signalling version, or may be determined by other means such as auto-configuration.Setting this variable to a value of 'notApplicable' is not allowed. To modify the ciscoAtmIfUniSignallingVersion, ifAdminStatus has to be down and atmIfIlmiAutoConfiguration disabled.

What is ciscoAtmIfUniSignallingVersion?

Configures the UNI signalling version (e.g., 3.0, 3.1, or 4.0) currently used on this ATM interface when it operates as a UNI or IISP interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.14.1.1.1.21
snmpwalk -v2c -c public <target> CISCO-ATM-IF-MIB::ciscoAtmIfUniSignallingVersion

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.14.1.1.1.21.1
snmpget -v2c -c public <target> CISCO-ATM-IF-MIB::ciscoAtmIfUniSignallingVersion.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.14.1.1.1.21.1 i <value>

Start monitoring Cisco ATM switch/router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-IF-MIB::ciscoAtmIfUniSignallingVersion OID value, configure state conditions and alerts, and monitor any Cisco ATM switch/router from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.14ciscoAtmIfMIBCISCO-ATM-IF-MIB
1.3.6.1.4.1.9.10.14.1ciscoAtmIfMIBObjectsCISCO-ATM-IF-MIB
1.3.6.1.4.1.9.10.14.1.1ciscoAtmIfTableCISCO-ATM-IF-MIB
1.3.6.1.4.1.9.10.14.1.1.1ciscoAtmIfEntryCISCO-ATM-IF-MIB
1.3.6.1.4.1.9.10.14.1.1.1.21ciscoAtmIfUniSignallingVersionCISCO-ATM-IF-MIB