All MIBs › CISCO-ATM-DUAL-PHY-MIB › cadpStatUncorrectableHCSErrors
cadpStatUncorrectableHCSErrors
Module: CISCO-ATM-DUAL-PHY-MIB
OID (symbolic): CISCO-ATM-DUAL-PHY-MIB::cadpStatUncorrectableHCSErrors
OID (numeric): 1.3.6.1.4.1.9.9.60.1.1.1.1.12
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The Header Checksum (HCS) is a CRC-8 calculation over the first 4 octets of the ATM cell header. The received HCS is verified using the polynomial x^8 + x^2 + x + 1. The coset polynomial x^6 + x^4 + x^2 + 1, is added (modulo 2) to the received HCS octet before comparison with the calculated result. Cells with single bit error in the HCS byte are corrected. Cells with more than one bit error in the HCS byte are uncorrectable.
Count of uncorrectable Header Checksum (HCS) errors on this phy.
What is cadpStatUncorrectableHCSErrors?
Counts ATM cell Header Checksum (HCS) errors that could not be corrected, based on a CRC-8 check over the cell header.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.12 snmpwalk -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatUncorrectableHCSErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.12.1 snmpget -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatUncorrectableHCSErrors.1
Start monitoring Cisco router/switch with redundant ATM PHY line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-DUAL-PHY-MIB::cadpStatUncorrectableHCSErrors OID value, configure state conditions and alerts, and monitor any Cisco router/switch with redundant ATM PHY line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1 | ciscoAtmDualPhyMIBObjects | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1 | cadpStatistics | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1 | cadpStatTable | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1 | cadpStatEntry | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.12 | cadpStatUncorrectableHCSErrors | CISCO-ATM-DUAL-PHY-MIB |