All MIBs › CISCO-ATM-DUAL-PHY-MIB › cadpStatSectionBIP8Errors
cadpStatSectionBIP8Errors
Module: CISCO-ATM-DUAL-PHY-MIB
OID (symbolic): CISCO-ATM-DUAL-PHY-MIB::cadpStatSectionBIP8Errors
OID (numeric): 1.3.6.1.4.1.9.9.60.1.1.1.1.6
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The Bit Interleaved Parity 8 is an error checking code applied for quick isolation of faults. Each bit in the B octets is set to 1 or 0 as necessary to obtain even parity over the previous frame. The calculated BIP-8 code for frame N is compared with the BIP-8 code extracted from the B1 byte of frame N+1. Differences indicate that a section level bit error has occurred.
Count of Section BIP-8 (Bit Interleaved Parity) errors that have been detected on this phy.
What is cadpStatSectionBIP8Errors?
Counts Section-layer Bit Interleaved Parity-8 (BIP-8) errors, a checksum mismatch used to quickly detect transmission faults on the ATM physical interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.6 snmpwalk -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatSectionBIP8Errors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.6.1 snmpget -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatSectionBIP8Errors.1
Start monitoring Cisco router/switch with redundant ATM PHY line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-DUAL-PHY-MIB::cadpStatSectionBIP8Errors OID value, configure state conditions and alerts, and monitor any Cisco router/switch with redundant ATM PHY line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1 | ciscoAtmDualPhyMIBObjects | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1 | cadpStatistics | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1 | cadpStatTable | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1 | cadpStatEntry | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.6 | cadpStatSectionBIP8Errors | CISCO-ATM-DUAL-PHY-MIB |