All MIBs › CISCO-ATM-DUAL-PHY-MIB › cadpStatPathFEBErrors
cadpStatPathFEBErrors
Module: CISCO-ATM-DUAL-PHY-MIB
OID (symbolic): CISCO-ATM-DUAL-PHY-MIB::cadpStatPathFEBErrors
OID (numeric): 1.3.6.1.4.1.9.9.60.1.1.1.1.10
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of B3 errors in the previous frame inserted by the transmitter. The receiver checks for this in the G1 byte of the frame. A non-zero value (legal range is binary 0000 - 1000) indicates a line layer error in the remote end. Any other value is treated as no error.
Count of Path Far End Bit Errors (FEBE) on this phy.
What is cadpStatPathFEBErrors?
Counts Path Far-End Block (FEB) errors reported by the remote end via the G1 byte, indicating errors detected at the far end of the path.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.10 snmpwalk -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatPathFEBErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.1.1.10.1 snmpget -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatPathFEBErrors.1
Start monitoring Cisco router/switch with redundant ATM PHY line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-DUAL-PHY-MIB::cadpStatPathFEBErrors OID value, configure state conditions and alerts, and monitor any Cisco router/switch with redundant ATM PHY line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1 | ciscoAtmDualPhyMIBObjects | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1 | cadpStatistics | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1 | cadpStatTable | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1 | cadpStatEntry | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.1.1.10 | cadpStatPathFEBErrors | CISCO-ATM-DUAL-PHY-MIB |