All MIBs › CISCO-ATM-DUAL-PHY-MIB › cadpStatOperActivePhy
cadpStatOperActivePhy
Module: CISCO-ATM-DUAL-PHY-MIB
OID (symbolic): CISCO-ATM-DUAL-PHY-MIB::cadpStatOperActivePhy
OID (numeric): 1.3.6.1.4.1.9.9.60.1.1.2
Node type: OBJECT-TYPE
Type: InterfaceIndexOrZero
Access: read-only
Description: Returns the ifIndex of the phy which is currently the active phy. A value of 0 indicates that no phy is currently active.
What is cadpStatOperActivePhy?
This object returns the ifIndex of whichever phy is currently the active one, with a value of 0 meaning no phy is active at all. Reporting an ifIndex rather than a per-phy flag lets a single poll identify exactly which physical interface is carrying traffic, and a value of 0 is itself an alarm condition meaning the ATM module currently has no working physical path whatsoever. This object reading 0 during a dual fiber cut means the logical ATM interface has completely lost its physical path even though its configuration entry still exists.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.2 snmpwalk -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatOperActivePhy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.60.1.1.2.1 snmpget -v2c -c public <target> CISCO-ATM-DUAL-PHY-MIB::cadpStatOperActivePhy.1
Start monitoring Cisco router/switch with redundant ATM PHY line cards with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-DUAL-PHY-MIB::cadpStatOperActivePhy OID value, configure state conditions and alerts, and monitor any Cisco router/switch with redundant ATM PHY line cards from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1 | ciscoAtmDualPhyMIBObjects | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1 | cadpStatistics | CISCO-ATM-DUAL-PHY-MIB |
| 1.3.6.1.4.1.9.9.60.1.1.2 | cadpStatOperActivePhy | CISCO-ATM-DUAL-PHY-MIB |